numerical investigation of clocking in a two-stage gas turbine

Numerical investigation of clocking in a two-stage gas turbine

Flow in the first two-stage of V 94.2 gas turbine is simulated numerically. In this turbine, the second stator is clocked relative to the first stator to different positions. Steady-state analysis was carried out by varying the circumferential relative position of the consecutive stator vanes to study the effects of the clocking on turbine performance. A density based compressible inviscid ...

Numerical Investigation of Rotating-Stall in a Stage of an Axial Compressor with Two Different Approaches

An unsteady two-dimensional finite-volume solver was developed based on Van Leer’s flux splitting algorithm in conjunction with “Monotonic Upstream Scheme for Conservation Laws (MUSCL)” limiters and the two-layer Baldwin-Lomax turbulence model was also implemented. To validate the solver, two test cases were prepared and the computed results had good agreements with reference data. The rotating...

Stage Marine Gas Turbine Blade

Turbine blades of a gas turbine are responsible for extracting energy from the high temperature, high pressure gases. These blades are operated at elevated temperatures in aggressive environments and are subjected to large centrifugal forces. As many as 42 percent of the failures in gas turbine engines were only due to blading problems and the failures in these turbine blades can have dramatic ...

Numerical Simulation of a Confined Swirling Flow in a Model Gas Turbine Combustor

Numerical Investigation of a Two-stage Counter-rotating Turbine with Transition Modeling and Prediction Improvement with Time-accurate Calculations

Accurate numerical simulations depend on the correct prediction of all relevant flow phenomena. For many aeronautical devices such as turbomachinery the behavior of boundary layers, wall-shear-stress and wall heat transfer are significant for the performance. Turbulence and transition influence such flow characteristics. Onset and extent of transition can therefore be of high importance for the...

Numerical Investigation of S822 Wind Turbine Airfoil

We carried out direct numerical simulations of the flow past a two-dimensional S822 wind turbine blade section at a chord Reynolds number of Re=100,000 and an angle of attack of α = 5deg. Without blade rotation the separated boundary layer “rolls up” into spanwise vortices which then “break up” into smaller scale structures leading to transition to turbulence. Simulation results compare favorab...