ZnO–PTFE-based antimicrobial, anti-reflective display coatings and high-sensitivity touch sensors

Abrasion Resistant Anti-Reflective Sol-Gel Coatings

Many optics in both the OMEGA and OMEGA EP lasers are coated with anti-reflective (AR) silane sol-gel to maximize their transmittance. Although these coatings are highly resistant to both airborne contaminants and laser damage, they are susceptible to mechanical damage by abrasion, and thus require extra care during the handling, installation and alignment of sol-gel optics. Previous “hardened”...

High-reflective Coatings for Ground and Space Based Applications

High-reflective coatings are indispensable in order to manufacture mirrors with highest possible reflectivity. The maximum reflectivity can be achieved by all-dielectric coatings; however, the spectral bandwidth of these mirrors is limited. For astronomical applications metal based coatings (Al, Au, Ag) are commonly applied, as they allow high reflectivity and at the same time a broad spectral ...

UV-blocking ZnO nanostructure anti-reflective coatings

Anti-reflective coatings reflect ultraviolet radiation.

Anti-reflective (AR) coatings provide numerous visual benefits to spectacle wearers. However, coating designers and manufacturers seem to have placed little or no emphasis on reflectance of wavelengths outside the visible spectrum. Ultraviolet (UV) radiation from sources behind the wearer can reflect from the back lens surface toward the wearer's eye. Various clear lens materials, with and with...

Anti-reflective optical coatings incorporating nanoparticles.

This paper presents a simple approach for forming anti-reflective film stacks on plastic substrates employing aqueous colloidal dispersions of metal oxide nanoparticles. Results demonstrate that it is possible to fabricate a polymeric thin film of continuously tunable refractive index over a wide range by loading the film with varying concentrations of metal oxide nanoparticles. Specifically, t...