ZnO Nanoestructured Layers Processing with Morphology Control by Pulsed Electrodeposition
نویسندگان
چکیده
منابع مشابه
Pulsed Electrodeposition of Copper
Pulsed electrolysis of copper has been systematically investigated by electrodepositing copper from a copper sulfate bath. Pulse duty cycles of 5 to 80 percent, at frequencies from 10 to 100 Hz with current densities ranging from 2.5 to 7.5 A/dm2 were employed. The appearance of Hull Cell panels with both direct current and pulsed current was recorded. The influence of pulsed current on current...
متن کاملNucleant layer effect on nanocolumnar ZnO films grown by electrodeposition
Different ZnO nanostructured films were electrochemically grown, using an aqueous solution based on ZnCl2, on three types of transparent conductive oxides grow on commercial ITO (In2O3:Sn)-covered glass substrates: (1) ZnO prepared by spin coating, (2) ZnO prepared by direct current magnetron sputtering, and (3) commercial ITO-covered glass substrates. Although thin, these primary oxide layers ...
متن کاملVisualization of Active and Passive Control of Morphology during Electrodeposition
Morphological instability, particularly dendrite formation, can cause potentially catastrophic failure in rechargeable batteries. Morphological instabilities can lower the quality of electroplated coatings, yet may also be useful in forming porous deposits. Thus, it is important to develop strategies to control these instabilities. Liquid cell electron microscopy allows us to image in real time...
متن کاملZnO growth on Si with low-temperature ZnO buffer layers by ECR-assisted MBE
High-quality ZnO films were grown on Si(1 0 0) substrates with low-temperature (LT) ZnO buffer layers by an electron cyclotron resonance (ECR)-assisted molecular-beam epitaxy (MBE). In order to investigate the optimized buffer layer temperature, ZnO buffer layers of about 1.1 mm were grown at different growth temperatures of 350, 450 and 550 1C, followed by identical high-temperature (HT) ZnO f...
متن کاملEffect of Magnetic Field on Surface Morphology and Magnetic Properties of FeCu/Cu Nano layers Prepared by Electrodeposition Technique: Investigation of Magneto-hydrodynamic Effect
In this paper, the effect of magnetic field on the morphology, structure and magnetic properties of electrodeposited FeCu/Cu thin films was investigated. The films were deposited on Au2PdAg/glass substrates using electrodeposition technique in potentiostatic control. The magnetic fields of 5000 and 7000 Oe were applied on deposition bath during deposition. Two series of thin films were prepared...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Electrochemical Society
سال: 2011
ISSN: 0013-4651
DOI: 10.1149/1.3593004