ZnO Film Flexible Printed Circuit Board pH Sensor Measurement and Characterization

Feasibility Test of a Liquid Film Thickness Sensor on a Flexible Printed Circuit Board Using a Three-Electrode Conductance Method

Liquid film thickness measurements under temperature-varying conditions in a two-phase flow are of great importance to refining our understanding of two-phase flows. In order to overcome the limitations of the conventional electrical means of measuring the thickness of a liquid film, this study proposes a three-electrode conductance method, with the device fabricated on a flexible printed circu...

Printed circuit board inspection

This paper provides a general overview of immediate and long-term aims of the printed circuit board inspection project of The Robotics Institute. Its purpose is to highlight some of the significant issues specific to printed circuit board inspection and to provide a discussion of our basic thesis that machine inspection should be coupled with machine diagnosis of the causes of observed printed ...

Process Optimization for Flexible Printed Circuit Board Assembly Manufacturing

Copyright 2012 KIEEME. All rights reserved. This is an open-access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0) which permits unrestricted noncommercial use, distribution, and reproduction in any medium, provided the original work is properly cited. pISSN: 1229-7607 eISSN: 2092-7592 DOI: http://dx...

Printed Circuit Board Deconstruction Techniques

The primary purpose of printed circuit board (PCB) reverse engineering is to determine electronic system or subsystem functionality by analyzing how components are interconnected. We performed a series of experiments using both inexpensive home-based solutions and state-of-the-art technologies with a goal of removing exterior coatings and accessing individual PCB layers. This paper presents our...

Assembly and Printed Circuit Board (pcb) Package