Zirconia nano-colloids transfer from continuous hydrothermal synthesis to inkjet printing
نویسندگان
چکیده
منابع مشابه
Inkjet printing of nanosized silver colloids.
A water-based conducting ink, composed of well dispersed nano-silver particles, has been successfully inkjet printed using an ordinary commercial printer. The silver colloids with diameter around 50 nm were dispersed in a water and diethylene glycol cosolvent system. The 25 wt% silver ink had a viscosity of about 7.4 cP and surface tension of 33.5 dyn cm(-1) at 20 degrees C, which is appropriat...
متن کاملHydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology
A hydrothermal method for preparation of nano-size zirconia has been studied to optimize the effective parameters (precursor concentration, temperature and time) using response surface methodology (RSM). The synthesized zirconia samples were characterized through X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscopy (TEM) analyses to identify mean nano...
متن کاملInkjet Printing Ceramics: From Drops to Solid
Inkjet printing is a powerful microfabrication tool that has been applied to the manufacture of ceramic components. To successfully fabricate ceramic objects a number of conditions must be satisfied concerning fluid properties and drop placement accuracy. It has been proposed that fluids are printable within the bounds 1 <Z < 10 (where Z is the inverse of the Ohnesorge number) and these limits ...
متن کاملInstant nano-hydroxyapatite: a continuous and rapid hydrothermal synthesis.
Nano-particle hydroxyapatite (HA) rods, were rapidly synthesised using a three pump continuous hydrothermal process (using a water feed at up to 400 degrees C and at 24 MPa): the product was obtained as a highly crystalline and phase pure material, without the need for an ageing step or subsequent heat treatment.
متن کاملhydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology
a hydrothermal method for preparation of nano-size zirconia has been studied to optimize the effective parameters (precursor concentration, temperature and time) using response surface methodology (rsm). the synthesized zirconia samples were characterized through x-ray diffraction (xrd), scanning electron microscope (sem) and transmission electron microscopy (tem) analyses to identify mean nano...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the European Ceramic Society
سال: 2019
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2017.11.035