Young's Modulus Reduction due to Transverse Cracking in Interlaminar-Toughened Composite Laminates.
نویسندگان
چکیده
منابع مشابه
Quantitative Evaluation of Interlaminar-Toughened CFRP Composite by Ultrasonic Wave Propagation Characteristics
The interlaminar-toughened CFRP composite, T800H/3900-2, has interlaminar resin layers, whose thickness is about 20 mm. The interlaminar layer was evaluated quantitatively using an ultrasonic micro-spectrometer (UMSM) for the determination of the elastic constants, which is quite difficult by other techniques. At first, the composite was ground to remove the outermost CFRP layer, and the interl...
متن کاملCracking in brittle laminates from concentrated loads
A study is made of the crack resistance of multilaminates consisting of brittle layers interleaved with compliant interlayers and bonded to compliant substrates. Specific attention is paid to flexure-generated radial cracks in the undersurfaces of individual glass layers from concentrated loads applied at the top surfaces. A proposed condition for acceptance of such multilayer systems is that r...
متن کاملImpact Damage Detection of Toughened CFRP Laminates with Time Domain
Laminated Carbon Fiber Reinforced Polymer (CFRP) composites are very effective in weight saving in aeronautical structural components. For these laminated CFRP structures, it is, however, difficult to detect damage such as delamination, matrix cracks, and local fiber breakages caused by low velocity impact loading In the previous study in 2009, Time Domain Reflectometry (TDR) method was applied...
متن کاملA Statistical Approach to Evaluate the Effect of Manufacturing Quality on Transverse Cracking in Cross Ply Laminates
Most studies of the effects of manufacturing defects such as voids have focused on composite strength properties, e.g. the interlaminar strength [1]. The current study investigates how irregularities in the manufacturing process affect progressive damage in the subcritical regime. This effort is along the lines of a broader strategy for performance evaluation of composites coined as defect dama...
متن کاملCracking of Laminates Subjected to Biaxial Tensile Strains
During the processing of laminar ceramic, biaxial, residual stresses can arise due to differential thermal contraction between unlike layers. A tensile stress can cause pre-existing flaws to extend across the layer and into the adjacent layers and then tunnel until they meet either another crack or a free surface. A previous analysis has shown that for a given residual stress there is a critica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1997
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.63.2631