XPS In-Depth Profiles of Native-Oxide/P-Doped-Si Obtained by Chemical Etching.
نویسندگان
چکیده
منابع مشابه
Optical photoresponse of CuS-n-Si radial heterojunction with Si nanocone arrays fabricated by chemical etching.
The paper deals with the fabrication of a p-CuS-n-Si nanocone heterojunction based highly sensitive broad band photodetector. Cone-like one dimensional Si nanostructures formed by metal assisted chemical etching, with superior antireflection characteristics have been used as templates for fabrication of the heterojunction. Covellite CuS material was synthesized by a simple chemical reaction for...
متن کاملNanotextured Si Solar Cells on Microtextured Pyramidal Surfaces by Silver-assisted Chemical Etching Process
Copyright ©2015 KIEEME. All rights reserved. This is an open-access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0) which permits unrestricted noncommercial use, distribution, and reproduction in any medium, provided the original work is properly cited. pISSN: 1229-7607 eISSN: 2092-7592 DOI: http://dx...
متن کاملSynthesis of Cu Doped NiO Nanoparticles by Chemical Method
The Cu doped NiO (NiO:Cu) nanoparticles were synthesized by co-precipitation method using NiCl2.6H2O, CuCl2.2H2O for Ni and Cu sources, respectively. Sodium hydroxide has been used as a precipitator agent. Effect of Cu doping agent on the structural and optical properties of nanostructures were characterized by XRD, SEM, AFM, spectrophotometry, FTIR a...
متن کاملLeaching of heavy metal from native plants by chemical leachants
Plant biomass harvested after heavy-metal phytoremediation must be considered as a hazardous waste that should be contained or treated appropriately before disposal or reuse. This study provides an evaluation of extractants for the removal of lead from Abutilon Theophrastus biomass. The research was carried out a leaching study to determine the lead-extraction efficiency of the different leacha...
متن کاملTriangle pore arrays fabricated on Si (111) substrate by sphere lithography combined with metal-assisted chemical etching and anisotropic chemical etching
The morphological change of silicon macropore arrays formed by metal-assisted chemical etching using shape-controlled Au thin film arrays was investigated during anisotropic chemical etching in tetramethylammonium hydroxide (TMAH) aqueous solution. After the deposition of Au as the etching catalyst on (111) silicon through a honeycomb mask prepared by sphere lithography, the specimens were etch...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SHINKU
سال: 1997
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.40.258