X-Ray Stress Measurement on the Cementite Phase in Steels

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of silicon on cementite precipitation in steels

The mechanism by which relatively small concentrations of silicon influence the precipitation of cementite from carbon supersaturated austenite and ferrite are investigated. It is found that one condition for the retardation of cementite is that the latter must grow under para-equilibrium conditions, i.e. the silicon must be trapped in the cementite. However, this is not a sufficient condition ...

متن کامل

Dilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr

Cementite dissolution in hypereutectoid steels containing Cr is analyzed using dilatometry combined with the consideration of the carbon content in the austenite. The results suggest that the austenite transformed from the mixture of ferrite and cementite can be approximated to have a carbon content corresponding to equilibrium with ferrite. The overall dissolution behavior of cementite is desc...

متن کامل

Electropulse - induced cementite nanoparticle formation in deformed pearlitic steels

Passing one electric-current pulse through deformed pearlitic steel wires at room temperature causes the formation of cementite particles around 30 nm in size. This is found not only in some particular locations but throughout the cementite area, which reveals a different mechanism from traditional spheroidization of cementite plates because the latter leads to the formation of particles with m...

متن کامل

Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods

The aim of this research is to investigate different X-ray based quantitative phase analysis methods for determination of cristobalite phase content in ceramic cores. For this purpose, four popular routes including peak absolute intensity method, relative intensity ratio method, direct or calibration method and internal standard (or Alexander-Klug) method have been chosen. Some control samples ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Bulletin of JSME

سال: 1969

ISSN: 0021-3764,1881-1426

DOI: 10.1299/jsme1958.12.931