X-ray stress measurement of sintered alumina.
نویسندگان
چکیده
منابع مشابه
Microstructure and mechanical properties of pressureless sintered alumina-silver composites
The silver toughened alumina ceramics, which were fabricated via a conventional ceramic processing route using commercially available alumina and silver oxide powders as the starting materials, exhibit a higher fracture toughness (6 to 9 MPamo.5) than the monolithic alumina ceramic ( 2.5 to 3.0 MPamo.5). The weak interfacial bonding between the silver inclusions and the alumina matrix is charac...
متن کاملIn Situ Measurement of Growth Stress in Alumina Scale
n the early stages of growth has been measured in α-Al2O3 (alumina) scales formed on and NiAl-based alloys during heating in air at 1000 to 1200°C. Scale thickness rom 0.5 to 5 μm, times from 5 to 720 min. Stress was measured using the multiple-tilt . In order to measure the thinnest scales at the earliest times, focused, monochromatic tron radiation was used for high intensity, and a fixed, sm...
متن کاملElliptical X-ray Spot Measurement
The so-called roll bar measurement uses a heavy metal material, optically thick to x-rays, to form a shadow of the x-ray origination spot. This spot is where an energetic electron beam interacts with a high Z target. The material (the “roll bar”) is slightly curved to avoid alignment problems. The roll bar is constructed and positioned so that the x-rays are shadowed in the horizontal and verti...
متن کاملFootprint as an alternative to X-ray in hallux valgus angle measurement
Background: X- ray images provide accurate and reliable data in different foot pathologies. However, the accompanied complications will limit its use for epidemiological studies and research purposes, especially in children. Therefore, simple, accessible, and cost- effective methods such as footprint, with a good correlation with x-ray images, are needed to help diagnose different foot pa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1986
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.35.749