X-Ray Reflectivity Measurements of Surface Roughness Using Energy Dispersive Detection
نویسندگان
چکیده
منابع مشابه
X-ray reflectivity measurements of surface layering in liquid mercury.
The surface normal structure of the mercury liquid-vapor interface has been investigated by measuring the x-ray reflectivity out to a momentum transfer of qz 2.5 Å . The results provide direct experimental proof of surface layering in liquid metals. The layer spacing is given by the atomic dimensions of the Hg atoms. The minimum layer width agrees well with the predictions of capillary wave t...
متن کاملEnergy-dispersive X-ray reflectivity and GID for real-time growth studies of pentacene thin films
We use energy-dispersive X-ray reflectivity and grazing incidence diffraction (GID) to follow the growth of the crystalline organic semiconductor pentacene on silicon oxide in-situ and in real-time. The technique allows for monitoring Bragg reflections and measuring X-ray growth oscillations with a time resolution of 1 min in a wide q-range in reciprocal space extending over 0.25–0.80 Å, i.e. s...
متن کاملEnergy-dispersive X-ray diffraction using an annular beam.
We demonstrate material phase identification by measuring polychromatic diffraction spots from samples at least 20 mm in diameter and up to 10 mm thick with an energy resolving point detector. Within our method an annular X-ray beam in the form of a conical shell is incident with its symmetry axis normal to an extended polycrystalline sample. The detector is configured to receive diffracted flu...
متن کاملDetermination of microscopic interaction constants by x-ray reflectivity measurements
The density profiles of liquid-gas interfaces of binary mixtures are determined by xray reflectivity measurements. The surface tension γ is calculated from the measured data in the framework of the capillary waves theory. It is demonstrated that gradient theory can be used to investigate the van der Waals interaction between the different constituents of the liquid. The determination of Lennard...
متن کاملVoid Detection In Copper Interconnects Using Energy Dispersive X-Ray Spectroscopy
Low-dimensional copper interconnects are prone to void formation which takes place during the Cu-filling of narrow interconnect lines. These voids increase the electrical resistance of the interconnects which in turn results in an increase of the RC delay of the integrated circuit. Therefore, a fast and non-destructive method is needed, which will allow the detection of the voids in copper inte...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MRS Proceedings
سال: 1990
ISSN: 0272-9172,1946-4274
DOI: 10.1557/proc-208-351