X-RAY MEASUREMENTS OF FUEL SPRAY SPECIFIC SURFACE AREA AND SAUTER MEAN DIAMETER FOR CAVITATING AND NON-CAVITATING DIESEL SPRAYS
نویسندگان
چکیده
منابع مشابه
Evaluation and Validation of ELSA Model in Diesel Sprays: 3D Cavitating Nozzles Case
Computational Fluid Dynamic (CFD) techniques have become one of the main tools in the design and development of diesel engines. There exist, however, some drawbacks and problems that must be overcome in the next years. One of the challenges is to predict accurately the couple between the flow inside the nozzle and the spray, including the primary break-up and the secondary atomization. In the l...
متن کاملFlow Instabilities in Cavitating and Non-Cavitating Pumps
It is well known that flow instabilities called rotating stall and surge may occur in non-cavitating turbomachines at flow rates smaller than design. Rotating stall is a local instability at the turbomachinery which is basically not dependent on the hydraulic system in which the turbomachine is installed. The stalled region rotates faster than impeller. Surge is a system instability in a hydrau...
متن کاملPresenting an Empirical Correlation for Maximum Sauter Mean Diameter in a Spray Extraction Column
Based on the importance of drops' behavior in liquid-liquid extraction, the maximum sauter mean drop diameter has been investigated and correlated in a counter-current spray extraction column with two chemical systems. Spargers were set of nozzles in all experiments. Studying the effects of several parameters on drops size, some correlations were estimated by the last available version of softw...
متن کاملEntrance surface dose measurements for routine X-ray examinations in Chaharmahal and Bakhtiari hospitals
Background: There is not any report on the radiation doses received by patients in diagnostic radiology sections in hospitals under control of Chaharmahal and Bakhtiari Medical Sciences University, in the south west of Iran. Objectives: The aim of this study is measurement of entrance surface doses (ESD) for the most routine types of X-ray procedures in radiology centers as part of ongoing d...
متن کاملAssessment of Atomization Models for Diesel Engine Simulations
Liquid fuel injection and atomization have a significant influence on the combustion and emission characteristics of diesel engines. Using x-ray radiography, it is possible to obtain quantitative and time-resolved data in the primary breakup region close to the injector nozzle. However, most previous studies on model validations have employed optical measurements that are not applicable in this...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Atomization and Sprays
سال: 2019
ISSN: 1044-5110
DOI: 10.1615/atomizspr.2019030112