X-Ray Measurement of Residual Stress in Ceramic Composites, Coatings and Joints.

Measurement of Residual Stresses in Fiber Reinforced Composites Based on X-Ray Diffraction

1. ABSTRACT X-ray diffraction (XRD) measurements have been made to determine residual stresses in embedded Al particles placed between the first and second ply of both unidirectional and fabric graphite/PMR-15 composite specimens. In order to further verify the results obtained, the effect of externally applied four-point bending on the measured strains and stresses in the Al inclusions was inv...

A new X-ray method for residual stress evaluation in coatings

Transition metal nitride coatings films such as TiN or ZrN have been extensively studied for industrial applications. Residual stresses of the coatings generally affect the mechanical behaviour and the corrosion resistance and hence the performance of the product. The development of new, fast and simple methods for the assessment of residual stresses is then of great importance for coating tech...

Nanohardness and Residual Stress in TiN Coatings

TiN films were prepared by the Cathodic arc evaporation deposition method under different negative substrate bias. AFM image analyses show that the growth mode of biased coatings changes from 3D island to lateral when the negative bias potential is increased. Nanohardness of the thin films was measured by nanoindentation, and residual stress was determined using Grazing incidence X ray diffract...

Recent Advances in the Measurement of Residual Stress by X-Ray Diffraction

Residual Stress in Ground WC-Co Coatings

High velocity oxygen fuel (HVOF) spray technique is one of the leading technologies that have been proposed as an alternative to the replacement of electrolytic hard chromium plating in a number of engineering applications. In this study, WC-Co powder was coated on AISI1045 steel using high velocity oxy fuel (HVOF) method. The sinψ method was used to evaluate the through thickness residual stre...