WRITING OF MAGNETIC DOMAINS USING SCANNING TUNNELING MICROSCOPE

Simulating Scanning Tunneling Microscope

Magnetic Force Scanning Tunneling Microscope Imaging of Overwritten Data

The magnetic force scanning tunneling microscopy is briefly discussed and demonstrated to successfully image overwritten data on commercial rigid magnetic disks. In particular, clear images of unerased remnants of the previously stored data are presented. These unerased data are attributed to slight radial deviations in write head tracking due to the intrinsic limitations in the electromechanic...

Studying of various nanolithography methods by using Scanning Probe Microscope

The Scanning Probe Microscopes (SPMs) based lithographic techniques have been demonstrated as an extremely capable patterning tool. Manipulating surfaces, creating atomic assembly, fabricating chemical patterns, imaging topography and characterizing various mechanical properties of materials in nanometer regime are enabled by this technique. In this paper, a qualified overview of diverse lithog...

Reproducible Fabrication of Scanning Tunneling Microscope Tips

Reproducible fabrication of Scanning Tunneling Microscope tips is carried out following an electrochemical procedure widely reported. Tips are made from 0.5 diameter tungsten wire. Controlling fabrication parameters (immersion in the electrochemical solution, current-voltage ranges, duration of the process, among others) we achieve aspect ratios of 0.68 and tip radii of 330 nm in the best case....

Theory of the scanning tunneling microscope.

We present a theory for tunneling between a real surface and a model probe tip, applicable to the recently developed "scanning tunneling microscope." The tunneling current is found to be proportional to the local density of states of the surface, at the position of the tip. The effective lateral resolution is related to the tip radius R and the vacuum gap distance d approximately as [(2 A)(R +d...