Woven Natural Fibre Reinforced Composite Materials for Medical Imaging
نویسندگان
چکیده
منابع مشابه
Machining of Fibre Reinforced Plastic Composite Materials
Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and m...
متن کاملFatigue Damage Modelling of Fibre-reinforced Composite Materials: Review
This paper presents a review of the major fatigue models and life time prediction methodologies for fibrereinforced polymer composites, subjected to fatigue loadings. In this review, the fatigue models have been classified in three major categories: fatigue life models, which do not take into account the actual degradation mechanisms but use S-N curves or Goodman-type diagrams and introduce som...
متن کاملCompressive response of a 3D non-woven carbon-fibre composite
The compressive response of a three-dimensional (3D) non-interlaced composite comprising three orthogonal sets of carbon fibre tows within an epoxy matrix is analysed. First, the compressive response is measured in three orthogonal directions and the deformation/failure modes analysed by a combination of X-ray tomography and optical microscopy. In contrast to traditional unidirectional and two-...
متن کاملNatural Fibre Reinforced Biodegradable Polymer Composites
Currently, numerous research groups have explored the production and properties of biocomposites where the polymer matrices are derived from renewable resources such as poly lactide (PLA), thermoplastic starch (TPS), cellulose and polyhydroxyalkanoates (PHAs). This review is carried out to evaluate the development and properties of natural fibre reinforced biodegradable polymer composites. They...
متن کاملUltrasonic Determination of Anisotropic Damage in Fibre and Textile Reinforced Composite Materials
The description of the very complex damage and failure behaviour of fibre and textile reinforced composites in damage models is objective of various research efforts. Such models strongly depend on the nature of the reinforcement (fabric, uniaxial or multiaxial layup) and additionally on micro-cracking geometry. With respect to the practical applicability the number of input parameters of damag...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13071684