Workspace Solution and Space Trajectory Planning of 5-DOF Manipulator
نویسندگان
چکیده
Abstract In this paper, a 5-DOF manipulator is designed to carry the pipeline robot. The joint coordinate system and connecting rod parameters of are confirmed by D-H method, kinematics model established. position direction end deduced using homogeneous transformation method. Monte Carlo method used solve workspace manipulator, MATLAB draw cloud map. Set motion trajectory space planning, through simulation form, get change joint. It provides foundation for dynamics analysis, control parameter optimization manipulator.
منابع مشابه
Joint space and workspace analysis of a two-DOF closed-chain manipulator
The aim of this paper is to compute of the generalized aspects, i.e. the maximal singularity-free domains in the Cartesian product of the joint space and workspace, for a planar parallel mechanism in using quadtree model and interval analysis based method. The parallel mechanisms can admit several solutions to the inverses and the direct kinematic models. These singular configurations divide th...
متن کاملTracking Trajectory Planning of Space Manipulator for Capturing Operation
On-orbit rescuing uncontrolled spinning satellite (USS) using space robot is a great challenge for future space service. This paper mainly present a trajectory planning method of space manipulator that can track, approach and catch the USS in free-floating situation. According to the motion characteristics of USS, we plan a spiral ascending trajectory for space manipulator to approach towards U...
متن کاملGlobal Minimum-Jerk Trajectory Planning of Space Manipulator
A novel approach based on genetic algorithms (GA) is developed to find a global minimum-jerk trajectory of a space robotic manipulator in joint space. The jerk, the third derivative of position of desired joint trajectory, adversely affects the efficiency of the control algorithms and stabilization of whole space robot system and therefore should be minimized. On the other hand, the importance ...
متن کاملNovel 6-DOF parallel manipulator with large workspace
The workspace of a parallel manipulator is usually smaller than the size of the robot itself. It is important to derive new structures that enjoy the advantages of parallel manipulators and also have a large workspace. In this paper we present two configurations of similar structures RRRS and RRSR with rotating links. The RRRS structure has a relatively large workspace—larger than the size of t...
متن کاملMotion Trajectory Planning and Simulation of 6- Dof Manipulator Arm Robot
In order to better study the trajectory of robot motion, a motion trajectory planning and simulation based on 6-DOF manipulator arm robot is designed. Three and five polynomial methods are adopted to plan motion trajectories. The advantages and disadvantages of the three and five polynomial trajectory planning are summarized. The trajectory planning in the right angle space can make the robot a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2022
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2239/1/012015