منابع مشابه
Wear Analysis during End Milling AISI 1018 Steel Using Microlubrication
Microlubrication minimizes the exposure of metal working fluids (MWFs) leading to an economical, safer and healthy workplace environment. In this study vegetable based lubricant is used to conduct wear analysis during end milling AISI 1018 steel using microlubrication. Solid carbide cutting tool was used with varying cutting speed and feed rate having a constant depth of cut. A full factorial e...
متن کاملFeasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel
The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...
متن کاملMicrolubrication effects in milling AISI 1018 steel:An approach towards Green Manufacturing
Flood cooling is primarily used to cool and lubricate the cutting tool and workpiece interface during machining process. The adverse health effects caused by the use of coolants and the potential economic advantages of greener machining methods are drawing manufacturer’s attention to adapt and develop new methods of using lubricants. Microlubrication serves as an alternative to flood cooling by...
متن کاملParametric Optimization of End Milling Of AISI 1018 Mild Steel by Various Lubricants with Solid Carbide End Mills
This study investigated the optimization of End milling of AISI 1018mild steel by various lubricants using the Grey relational analysis method. Quaker 7101, Blasocut strong 4000 and Velvex have been selected as lubricant. All the experiment are carried out at different cutting parameter (Number of Tool Flutes, Depth of cut, Spindle speed and Feed rate) in various lubricant assisted environment....
متن کاملMechanical Properties of Boronized AISI 316, AISI 1040, AISI 1045 and AISI 4140 Steels
In this study, some mechanical properties of borided and unborided four steels were investigated. Boronizing of steels was performed by powder pack method at 1210 K for 4 h. The hardness of borides, boride layer thickness and room temperature tensile properties were measured and it was observed that hardness and tensile properties strongly depend on chemical composition of steels. In addition, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2018
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/376/1/012049