Work Hardening and Change in Contact Condition of Rolling Contact Surface with Plastic Deformation
نویسندگان
چکیده
منابع مشابه
Predicting Plastic Deformation and Work Hardening during V- Band Formation
V-Band Clamps are manufactured using a cold roll forming process consisting of six passes which plastically deform an initially flat strip by bending to produce the band’s V-section. In this paper a new method of validating numerically predicted plastic deformation in a cold formed metal strip is presented. Tensile testing of samples of the band’s material was used to obtain a direct link betwe...
متن کاملElastic-plastic Contact of a Rough Surface with Weierstrass Profile
In this appendix, we list the expressions that characterize the response of an elastic-perfectly plastic solid with sinusoidal roughness to indentation by a rigid flat punch. The substrate is an elastic-perfectly plastic solid with Young’s modulus E, Poisson’s ratio ν and yield stress Y σ . The surface roughness has wavelength n λ and amplitude n g . In terms of these parameters, we define a ma...
متن کاملSurface separation and contact resistance considering sinusoidal elastic–plastic multi-scale rough surface contact
The current work considers the multi-scale nature of surface roughness in a new model that predicts the real area of contact and surface separation as functions of load. This work is based upon a previous rough surfacemulti-scale contactmodelwhichused stackedelastic–plastic spheres tomodel themultiple scales of roughness. Instead, this work uses stacked 3D sinusoids to represent the asperities ...
متن کاملMicro-plasticity of surface steps under adhesive contact: Part II – Multiple-dislocation mediated contact hardening
The study of the micro-plastic behavior of rough surface contact is the critical link towards a fundamental understanding of contact, friction, adhesion, and surface failures at small length scales. In the companion paper (Yu et al., J. Mech. Phys. Solids 55, 489-516, 2007), we have studied the onset of surface yielding due to single-dislocation nucleation from a stepped surface under adhesive ...
متن کاملRolling contact fatigue in martensitic 100Cr6: subsurface hardening and crack formation
Rolling contact fatigue tests on 100Cr6 steel were carried out with a ballon-rod tester. Microstructural damage was manifested by gradual hardness changes under the subsurface, and microcracks formed adjacent to inclusions; both being evidence of plastic deformation. The hardness increase appears to be due to the development of residual stress, while the microcracks form as a result of the conc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tribology Online
سال: 2009
ISSN: 1881-2198
DOI: 10.2474/trol.4.1