WOOD-PLASTIC COMPOSITE BASED ON POST-CONSUMER HDPE AND VERMICULITE / COMPÓSITO MADEIRA-PLÁSTICO À BASE DE HDPE PÓS-CONSUMO E VERMICULITA
نویسندگان
چکیده
منابع مشابه
A novel wood flour-filled composite based on microfibrillar high-density polyethylene (HDPE)/Nylon-6 blends.
A novel wood flour (WF)-filled composite based on the microfibrillar high-density polyethylene (HDPE) and Nylon-6 co-blend, in which both in situ formed Nylon-6 microfibrils and WF acted as reinforcing elements, was successfully developed using a two-step extrusion method. At the 30wt.% WF loading level, WF-filled composite based on the microfibrillized HDPE/Nylon-6 blend exhibited higher stren...
متن کاملProperties of Hdpe/clay/wood Nanocomposites
Composites based on high density polyethylene (HDPE), pine flour, and organic clay were made by melt compounding and then injection molding. The influence of clay on crystallization behavior, mechanical properties, water absorption, and thermal stability of HDPE/pine composites were investigated. The HDPE/pine composites containing exfoliated clay were made by a two-step melt compounding proced...
متن کاملInfluence of Nanoclay on Properties of HDPE/Wood Composites
Composites based on high density polyethylene (HDPE), pine flour, and organic clay were made by melt compounding and then injection molding. The influence of clay on crystallization behavior, mechanical properties, water absorption, and thermal stability of HDPE/pine composites was investigated. The HDPE/pine composites containing exfoliated clay were made by a two-step melt compounding procedu...
متن کاملproduction of wood/plastic composites based on pp/hdpe blends: determination of optimum conditions
mechanical properties of wood/plastic composites manufactured by polyethylene and polypropylene blends (pp/hdpe) were studied. the sebs (styrene-ethylene butylene-styrene) and epdm (ethylene-propylene diene monomer) were used as compatibilizers to improve the compatibility and miscibility of the interface between hdpe and pp phases. the sawdust and polymers were compounded using an internal mix...
متن کاملExperimental Study of Packing Time and Melt Temperature Effects on Shrinkage of a Thin Sheet Made of Wood-HDPE Composite
Injection molding is one of the most common processes which are used for manufacturing different plastic parts. This method includes 3 continuous steps: filling of the mold, cooling and driving the part out. A wide range of plastic and Non-Plastic materials can be used as raw material in this process. One of the most important advantages of this way of production is that it is very economic. In...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Brazilian Journal of Development
سال: 2020
ISSN: 2525-8761,2525-8761
DOI: 10.34117/bjdv6n10-653