Wood Ash Effectiveness in Cadmium Removal from Paint Industrial Effluent

Cadmium Removal from Aqueous Solutions Using Saxaul Tree Ash

Cadmium can be found in wastewater in high concentrations and can cause dangerous effect on aqueous environment and human health. At present, many methods have been used to heavy metals removal. Among this clean up techniques, adsorption techniques by using low-cost adsorbent are more considerable. In this study, batch adsorption experiments were conducted for removal of cadmium ions from a...

Removal of cadmium from aqueous solutions using industrial coal fly ash-nZVI

Batch experiments were conducted to test the effects of various solution properties, such as pH, temperature, initial concentration and anoxic and aerobic atmosphere, on Cd removal by nanoscale zerovalent iron (nZVI) supported on industrial coal fly ash. Cd (II) could be removed by adsorption on fly ash-nZVI in a very short time (5 min) with high removal rates (greater than 99.9%) over a wide r...

Cadmium Removal from Contaminated Water Using Polyelectrolyte-Coated Industrial Waste Fly Ash

Fly ash (FA) is a major industrial waste generated from power stations that add extra cost for proper disposal. Recent research efforts have consequently focused on developing ways to make use of FA in environmentally sound applications. This study, therefore, investigates the potential ability of raw fly ash (RFA) and polyelectrolyte-coated fly ash (PEFA) to remove cadmium (Cd) from polluted w...

Biosorptive Removal of Ni(Ii) from Wastewater and Industrial Effluent

The objective of the present work was to investigate the removal of Ni(II) by the fresh biomass (FBM) and chemically treated leached biomass (LBM) of Calotropis procera. The scope of the work included screening of the biosorbents for their metal uptake potential, batch equilibrium, column mode removal studies and kinetic studies at varying pH (2-6), contact time, biosorbent dosages (1-25 g/L) a...

Cadmium in forest mushrooms after application of wood ash.