Wire Rupture Optimization in Wire Electrical Discharge Machining using Taguchi Approach
نویسندگان
چکیده
منابع مشابه
Parametric Optimization for Surface Roughness in Wire Electrical Discharge Machining— A Taguchi Approach
High carbon high chromium alloy tool steels (D-3) with excellent abrasion resistance (HRC: 58-65) are increasingly used in manufacturing high performance cutting tools (dies and punches), blanking and punching tools, extrusion tools, etc. Being a hard material, it is difficult to machine using conventional machining methods. Wire Electric Discharge Machine(WEDM) seems to be a viable option to m...
متن کاملOptimization of Process Parameters of Wire Electrical Discharge Machining Using Fuzzy logic Integrated with Taguchi Method
In this paper, fuzzy logic integrated with the Taguchi method is used to optimize Wire Electro Discharge Machining (WEDM) process with multiple quality characteristics. Rough machining with EDM gives poor surface finish and has micro cracks and pores. Finish machining gives better surface finish but with very poor machining speed (MRR). Spark gap width is one of the important performance measur...
متن کاملOptimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method
Wire electrical discharge machining (WEDM) is extensively used in machining of conductive materials when precision is of prime importance. Rough cutting operation in WEDM is treated as a challenging one because improvement of more than one machining performance measures viz. metal removal rate (MRR), surface finish (SF) and cutting width (kerf) are sought to obtain a precision work. Using Taguc...
متن کاملOptimization of machining parameters and wire vibration in wire electrical discharge machining process
Background: Wire Electrical discharge machining (WEDM) has higher capability for cutting complex shapes with high precision for very hard materials without using high cost of cutting tools. During the WEDM process, the wire behaves like a metal string, straightened by two axial pulling forces and deformed laterally by a sum of forces from the discharge process. Major forces acting on the wire c...
متن کاملResponse of Wire Electrical Discharge Machining For H13 Using Taguchi L9 Array
This paper presents, the experimental study has been made to optimize the process parameters during machining of H-13 by wire electrical discharge machining (WEDM) using Taguchi L9 orthogonal array method. Following input process parameters of WEDM [Pulse-On time (TON), Pulse-Off time (TOFF) and Wire Speed rate (WS) and Wire Tension (WT)] were chosen as variables to study the process output in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2017
ISSN: 2261-236X
DOI: 10.1051/matecconf/20179507014