Wire Electrical Discharge Machining and Mechanical Properties of Gas Pressure Sintered MoSi2/Si3N4 Composites.
نویسندگان
چکیده
منابع مشابه
Optimization of machining parameters and wire vibration in wire electrical discharge machining process
Background: Wire Electrical discharge machining (WEDM) has higher capability for cutting complex shapes with high precision for very hard materials without using high cost of cutting tools. During the WEDM process, the wire behaves like a metal string, straightened by two axial pulling forces and deformed laterally by a sum of forces from the discharge process. Major forces acting on the wire c...
متن کاملMicro Wire Electrical Discharge Machining , Main Aspects , Tools And
The increasing demand of micro or miniature parts and the development of the micro machining processes are the cause of the growing of micro wire electrical discharge machining (μ-WEDM). μ-WEDM has the ability to manufacture complicate shapes with high accuracy and provides the advantage of machining any conductive materials regardless of their mechanical properties in the absence of significan...
متن کاملElectrical Discharge Machining of the Composites- a Literature Review
The use of unconventional machining techniques in shaping metal matrix composites (MMCs) has generated considerable interest as the manufacturing of complicated die contours. Metal matrix composites are advanced materials having high specific strength, good wear resistance, and high thermal expansion coefficient. Electrical discharge machining is a best process to make complicated shapes on the...
متن کاملElectrical Discharge Machining of Aluminum Metal Matrix Composites- A Review
Electrical discharge machining (EDM) is the process of machining electrically conductive materials by using precisely controlled sparks that occur between an electrode and a work piece in the presence of a dielectric fluid. Aluminium metal matrix composites (AMMCs) refer to the class of light weight high performance aluminum ceramic material systems. The reinforcement in AMMCs could be in the f...
متن کاملMicrostructure and mechanical properties of pressureless sintered alumina-silver composites
The silver toughened alumina ceramics, which were fabricated via a conventional ceramic processing route using commercially available alumina and silver oxide powders as the starting materials, exhibit a higher fracture toughness (6 to 9 MPamo.5) than the monolithic alumina ceramic ( 2.5 to 3.0 MPamo.5). The weak interfacial bonding between the silver inclusions and the alumina matrix is charac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2000
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.108.1257_469