Wheel-Sleeper Impact Model in Rail Vehicles Analysis
نویسندگان
چکیده
منابع مشابه
Analytical Approach to Vibration Analysis Of the Wheel-rail contact
Wheel/rail contact simulation is one of the most complicated problems in the modeling of railway vehicles. The wheel/rail interaction plays a unique role in rail vehicle dynamics. In this paper, the dynamic response of the wheel on irregular rail track is analyzed with analytical approach using the method of Multiple Scales (MMS). The Hertzian contact theory is used to obtain the relationshi...
متن کاملImpacts of Wheel–rail at Railway Turnouts
Investigation of vertical vibrations of a railway turnout is important in designing track components under moving loads of trains. In this paper, the turnout is simulated by a linear finite element model with modal damping. A section of the turnout has a length of 36 sleeper spans surrounding the crossing. Rails and sleepers are modeled with uniform Rayleigh-
Timoshenko beam elements. The ra...
متن کاملImpacts of Wheel–rail at Railway Turnouts
Investigation of vertical vibrations of a railway turnout is important in designing track components under moving loads of trains. In this paper, the turnout is simulated by a linear finite element model with modal damping. A section of the turnout has a length of 36 sleeper spans surrounding the crossing. Rails and sleepers are modeled with uniform Rayleigh- Timoshenko beam elements. The rail...
متن کاملWheel-Rail Profile Condition Monitoring
Increased railway patronage worldwide is putting pressure on rolling stock and infrastructure to operate at higher capacity and with improved punctuality. Condition monitoring is seen as a contributing factor in enabling this and is highlighted here in the context of rolling stock being procured with high capacity data buses, multiple sensors and centralised control. This therefore leaves scope...
متن کاملModeling the Dynamic Behaviour of the Wheel Rail Interface Using a Novel 3d Wheel-rail Contact Model
Methods for multibody modelling and simulation should accurately replicate the dynamic behaviour of rail-wheel interface including precise values for wheel-rail contact positions. This paper studies the development of a novel 3-D wheel-rail contact model which is used for dynamic simulation of a suspended wheelset with parameters listed for a typical Mark IV coach. The contact point locations o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of System Design and Dynamics
سال: 2007
ISSN: 1881-3046
DOI: 10.1299/jsdd.1.468