What is the promising anode material for Na ion batteries?
نویسندگان
چکیده
منابع مشابه
SnSe alloy as a promising anode material for Na-ion batteries.
SnSe alloy is examined for the first time as an anode for Na-ion batteries, and shows excellent electrochemical performance including a high reversible capacity of 707 mA h g(-1) and stable cycle performance over 50 cycles. Upon sodiation, SnSe is changed into amorphous NaxSn nanodomains dispersed in crystalline Na2Se, and SnSe is reversibly restored after desodiation.
متن کاملInitial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملBoron-doped graphene as a promising anode for Na-ion batteries.
The Na-ion battery has recently gained a lot of interest as a low-cost alternative to the current Li-ion battery technology. Its feasibility strongly depends on the development of suitable electrode materials. In the present work we propose a novel anode candidate, boron-doped graphene, for the Na-ion battery. Our first-principles calculations demonstrate that the sodiation of boron-doped graph...
متن کاملSurface‐Amorphous and Oxygen‐Deficient Li3VO4−δ as a Promising Anode Material for Lithium‐Ion Batteries
Surface-amorphous and oxygen-deficient Li3VO4-δsynthesized by simple annealing of Li3VO4 powders in a vacuum shows great enhancements in both reversible capacity and coulombic efficiency for the first discharge/charge without delicate size control and carbon coating. The results are associated with the improved charge-transfer kinetics caused by the amorphous surface of Li3VO4-δ .
متن کاملBimetallic coordination polymer as a promising anode material for lithium-ion batteries.
Bimetallic coordination polymers (BiCPs) with Zn and Co were synthesized and applied as anode materials. When the rate was increased to 2 A g(-1), a capacity of 622 mA h g(-1) after 500 cycles could still be maintained.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science Bulletin
سال: 2018
ISSN: 2095-9273
DOI: 10.1016/j.scib.2018.01.011