Wetting Characteristics of Aluminium-killed Steel with Molten Zinc
نویسندگان
چکیده
منابع مشابه
Liquid Metal Corrosion of 316L Stainless Steel, 410 Stainless Steel, and 1015 Carbon Steel in a Molten Zinc Bath
Corrosion tests of 1015 low-carbon steel and two stainless steels (410 and 316L) were conducted in a pure zinc bath (99.98 wt pct Zn) in order to better understand the reaction mechanisms that occur during the degradation of submerged hardware at industrial general (batch) galvanizing operations. Through this testing, it was found that, in general, 316L stainless steel showed the best dissoluti...
متن کاملSurface Morphology and Microstructure of Zinc Deposit From Imidazole with Zinc Chloride Low Temperature Molten Salt Electrolyte in The Presence of Aluminium Chloride
Low temperature molten salts have variety of applications in organic synthesis, catalytic processing, batteries and electrode position due to their air and water stability. They have wide potential window for their applications in voltage and temperature and hence there is a possibility to deposit metals which could not be deposited from aqueous electrolytes. Our aim and scope of our research w...
متن کاملZinc Ion Self-diffusion in Molten Zinc Bromide
The oven, in which the diffusion runs were carried out, was built of a vertical glass tube with a Kanthal winding (see Fig. 1). This winding was supplied with some extra terminals; shunting parts of it allowed the temperature to be kept constant (or slightly increasing upwards) over a sufficient length in the oven. The insulation consisted of rockwool, a section of which could be removed tempor...
متن کاملHigh Purity Aluminium-lithium Master Alloy by Molten Salt Electrolysis
The aim of t h i s work i s t o develop the economical product ion process of t h e AI-Li master a l l o y f r e e from m e t a l l i c sodium, calcium and potassium. Th i s master a l l o y can be used f o r aluminium-li thium a l l o y s f o r s t r u c t u a l m a t e r i a l s of a i r c r a f t s , automobi les and robots . Moreover t h e Al-Li master a l l o y with l i t h ium con ten t o...
متن کاملRemoval of MnS inclusions in molten steel using electropulsing
A method using electropulsing to separate inclusions from molten steel is developed, based on the differences in electrical properties between the inclusions and liquid metal. The inclusions have different electrical resistivity from that of the liquid steel and hence being expelled to the surface of the metal by electropulsing. In comparison with the as-solidified untreated steel, the size of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1983
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.69.7_798