Welding. Rapid Tooling Method Using Plasma Transferred Arc.

Microstructural Study of 17-4PH Stainless Steel after Plasma-Transferred Arc Welding

The improvement of the surface qualities and surface hardening of precipitation hardened martensitic stainless steel 17-4PH was achieved by the plasma-transferred arc welding (PTAW) process deposited with Co-based alloy. The microstructure of the heat affected zone (HAZ) and base metal were characterized by optical microscope (OM), scanning electron microscope (SEM) and transmission electron mi...

Metal Transfer and Arc Plasma in Gas Metal Arc Welding

This article analyzes the transient complex heat transfer and fluid flow in molten metal and arc plasma during the gas metal arc welding process. The model predicts the formation, growth, detachment, and transfer of droplets from the tip of a continuously fed electrode under the influences of several competing forces including gravity, electromagnetic force, arc pressure, plasma shear stress, a...

Method of Arc Welding Using Dual Serial Opposed Torches

Stochastic modelling of plasma reflection during keyhole arc welding

Keyhole arc welding (KAW), including the keyhole double-sided arc welding process being developed at the University of Kentucky and keyhole plasma arc welding, can achieve much deeper narrower penetration than all other arc welding processes. If it could be controlled such that the heat input and weld pool are minimized while at the same time the desired full penetration is guaranteed, it could...

Observation of the Keyhole during Plasma Arc Welding

Keyhole plasma arc welding is a unique arc welding process for deep penetration. To ensure the quality of the welds, the presence of the keyhole is critical. Understanding of the keyhole will certainly benefit the improvement of the process and weld quality. Currently, the size of the keyhole is assumed to be correlative with the robustness of the keyhole process in maintaining the keyhole. To ...