Welding of Very Dissimilar Materials (Fe-Al)

Control of Welding Residual Stress for Dissimilar Laser Welded Materials

The most common problem of welding dissimilar metals (DMWs) with respect to residual stresses is the differences in the coefficient of thermal expansion and heat conductivity of the two welded metals. In the present work, a CO2 continuous laser welding process was successfully applied and optimized for joining a dissimilar AISI 316 stainless steel and low carbon steel plates. The Taguchi approa...

Friction Stir Welding of Dissimilar Materials: An Overview

Femtosecond fiber laser welding of dissimilar metals.

In this paper, welding of dissimilar metals was demonstrated for the first time, to the best of our knowledge, by using a high-energy high-repetition-rate femtosecond fiber laser. Metallurgical and mechanical properties were investigated and analyzed under various processing parameters (pulse energy, repetition rate, and welding speed). Results showed that the formation of intermetallic brittle...

Weld speed effects on quality of Ti/Al dissimilar metal joints using laser beam welding

Laser beam welding produces good quality welds with minimum shrinkage for sheet metal joints. The quality of welded joint depends upon surface morphology, hardness, mixing of liquid phases and metallurgical non-homogeneity induced by gradients of temperatures and cooling rate at the weld interface. In the present investigation, Titanium Grade5 (Ti) and AA2024 (Al) alloy dissimilar sheet metals ...

Characteristics and Mechanical Properties of Bypass-Current MIG Welding-Brazed Dissimilar Al/Ti Joints

Abstract—Joining of 1mm thick aluminum 6061 to titanium TC4 was conducted using Bypass-current MIG welding-brazed, and stable welding process and good bead appearance were obtained. The Joint profile and microstructure of Ti/Al joints were observed by optical microscopy and SEM and then the structure of the interfacial reaction layers were analyzed in details. It was found that the intermetalli...