Welding Defects Occurrence and Their Effects on Weld Quality in Resistance Spot Welding of AHSS Steel
نویسندگان
چکیده
منابع مشابه
Analysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation
In the present research, the effects of spot-welding process parameters on the nugget diameter and electrode penetration depth of spot-welded joints were investigated. To achieve this, a spot-welded joint of three-thin sheet low carbon steels (same thicknesses of 0.8 mm) was simulated as an electerical-thermal-mechanical coupling of 3D finite element model. After validating the finite element s...
متن کاملNeural Network-Based Resistance Spot Welding Control and Quality Prediction
This paper describes the development and evaluation of neural network-based systems for industrial welding process control and weld quality assessment. The developed systems utilize recurrent neural networks for process control and both recurrent networks and static networks for quality prediction. The first section describes a system capable of both welding process control and real-time weld q...
متن کاملResistance spot welding of AISI 201 stainless steel: The relationship between welding current, microstructure, mechanical properties and failure mode
In this paper, resistance spot welding process of AISI 201 stainless steel is studied experimentally. For this purpose, effect of welding current on quality of weld is investigated and relationships between welding current and fusion zone characteristics are examined. For determining mechanical properties such as maximum load and fracture mode, tensile - shear test of spot welds is performed. ...
متن کاملQuality Evaluation and Automatic Classification in Resistance Spot Welding by Analyzing the Weld Image on Metal Bands by Computer Vision
This paper introduces a novel method for the quality evaluation of resistance spot welds. The evaluation is based on computer vision methods, which allow nondestructive on-line real-time processing. The input of the system is the image of a weld imprint on a metal band which covers the electrodes against wear and soiling. In order to find the position of the resistance spot welds, we describe a...
متن کاملDesign Parameters Selection and Optimization of Weld Zone Development in Resistance Spot Welding
This paper investigates the development of weld zone in Resistance Spot Welding (RSW) which focuses on weld nugget and Heat Affected Zone (HAZ). The effects of four factors namely weld current, weld time, electrode force and hold time were studied using a general 2 factorial design augmented by five centre points. The results of the analysis showed that all selected factors except hold time exh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2014
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.54.1883