Welded Joint Tests on Mn-Si High-Tensile Steels
نویسندگان
چکیده
منابع مشابه
Tensile Properties of Ferrite-austenitic Welded Joint
Very often, in order to optimized welded constructions, some of their parts are made of heterogeneous steels. For example, microalloyed steels are in use for cars chassis making and high alloyed steels for different constructions making. From that reason, it’s not rare to find welded joints between ferrite microalloyed and austenitic highalloyed steels. As a rule, these joints are welded by usi...
متن کاملTensile Tests on Stainless Steels in Temperature Range
In real conditions, austenitic stainless steels solidify in non equilibrium and a two phases microstructure of austenite and ferrite is formed 1 . The aim of this work was to investigate the behaviour of both phases at tensile testing, especially to find out an eventual difference in the relaxation of the deformation energy and the effect of the two phases microstructure in workability. To achi...
متن کاملULTRA FINE FERRITE FORMATION IN Si-Mn TRIP STEELS
Abstract: In the present investigation, the effects of thermomechanical processing parameters and the steel chemical composition on the ultra fine ferrite formation characteristics were studied. This was programmed relying on the capabilities of strain induced transformation (SIT) phenomenon and applying to different grades of Si-Mn TRIP (Transformation Induced Plasticity) steels. According...
متن کاملMicrostructure and Tensile-Shear Properties of Resistance Spot-Welded Medium Mn Steel
The medium Mn steels are gaining increasing attention due to their excellent combination of mechanical properties and material cost. A cold-rolled 0.1C5Mn medium Mn steel with a ferrite matrix plus metastable austenite duplex microstructure was resistance spot-welded with various welding currents and times. The nugget size rose with the increase of heat input, but when the welding current excee...
متن کاملEffect of Microstructure on Tensile Properties of Austenite-ferrite Welded Joint
R. Bakić, Tutin High School, Serbia, M. O. Abukresh, A. Sedmak. Faculty of Mechanical Engineering, University of Belgrade, Serbia, I. Samardžić, Faculty of Mechanical Engineering, Slavonski Brod, University of Osijek, Croatia, R. Jovičić, Innovation centre of the Faculty of Mechnical Engineering, Belgrade, Serbia Complex microstructure of austenite-ferrite welded joint has been investigated, fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1956
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.25.304