Weldability of Molybdenum–Rhenium Alloy Based on a Single-Mode Fiber Laser

Fiber refractometer based on a fiber Bragg grating and single-mode-multimode-single-mode fiber structure.

A refractive index (RI) sensor based on a novel fiber structure that consists of a single-mode-multimode-single-mode (SMS) fiber structure followed by a fiber Bragg grating was demonstrated. The multimode fiber in the SMS structure excites cladding modes within output single-mode fiber (SMF) and recouple the reflected cladding Bragg wavelength to the input SMF core. By measuring the relative Br...

Opto-VLSI-based tunable single-mode fiber laser.

A new tunable fiber ring laser structure employing an Opto-VLSI processor and an erbium-doped fiber amplifier (EDFA) is reported. The Opto-VLSI processor is able to dynamically select and couple a waveband from the gain spectrum of the EDFA into a fiber ring, leading to a narrow-linewidth high-quality tunable laser output. Experimental results demonstrate a tunable fiber laser of linewidth 0.05...

High-energy single-transverse-mode Q-switched fiber laser based on a multimode large-mode-area erbium-doped fiber.

We demonstrate that appropriately designed doped multimode fibers provide robust single-mode output when used within a fiber laser cavity. Using a novel large-mode-area fiber, we demonstrate what we believe to be record single-mode (M(2) <1.2) pulse energies of >0.5 mJ from a Q -switched fiber laser and even higher pulse energies (as high as 0.85 mJ) with slightly compromised spatial-mode quali...

A Passively Mode-Locked Erbium-Doped Fiber Laser Based on a Single-Wall Carbon Nanotube Polymer

Laser beam shaping using a single-mode fiber abrupt taper.

A new beam-shaping device was realized by an abrupt taper with a length of approximately 700 microm and a waist of approximately 40 microm. The insertion loss of the device is less than 3%. The diameter of the flat beam top can be up to approximately 900 microm with a small intensity variation (4%) and a small half-divergence angle (2.5 degrees). The conversion efficiency of the new device from...