Weldability of Grade 2 Titanium Sheets with Pulsed Nd:YAG Microlaser Welding Filler and Without Filler
نویسندگان
چکیده
منابع مشابه
Pulsed Nd:YAG Laser Dissimilar Welding of Grade 2 Titanium Alloy to 3105-O Aluminum Alloy using AlSi5 Filler Metal
A special form of laser spot welding is introduced to overlap dissimilar welding of titanium (G2) to 3105-O aluminum alloy. A welding tactile seam tracking design using following pulses that result to a circular seam leads to spot like shape laser welding. This technique was conducted to joint overlapped grad 2 Titanium alloy (Ti G2) to 3105-O Al alloy, with 1, and 0.5 mm thicknesses respective...
متن کاملLaser welding of dissimilar aluminium alloys with filler material
Laser welding of dissimilar aluminium alloys with filler material Luís Filipe Amaro Pinto Instituto Superior Técnico – Technical University of Lisbon – Portugal September 2008 Abstract The aluminium alloys are materials with great potential because of its high strength and low weight. However, the welding of dissimilar aluminium alloys is difficult in autogeneous welding, due to these alloys ar...
متن کاملIntelligent Control of Pulsed GTAW with Filler Metal
This paper addresses intelligent control of weld shape for plates with varied root openings during pulsed GTAW with filler metal, and is a development from the work in Refs. 1-3. The newly developed double-sided visual image sensing system could acquire the front topside, back topside, and backside images of the weld pool simultaneously in the same frame. The root opening and the doublesided we...
متن کاملFiller rhinoplasty.
The nose is one of the most important cosmetic units of the face. Discreet variations in the nose shape lead to marked physiognomy changes. Many patients dissatisfied with the appearance of their nose seek cosmetic improvement as early as during adolescence. Similar to other facial structures, the nose is affected by the aging process. Typically, nose tip drop is observed, along with loss of su...
متن کاملVacuum Brazing of Zirconium-Based Alloy and 321 Stainless Steel Using Titanium Based Filler Metal
Both Zirconium-based alloys and 321stainless steel are widely used as engineering alloys due to their good mechanical properties. Conventional fusion welding techniques for Zr alloys and stainless steel are not feasible due to the formation of brittle intermetallic compounds such as (Zr3Fe, ZrFe2 and Zr2Fe) and corrosion cracking. Brazing is one of the most wide...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science
سال: 2021
ISSN: 2029-7289,1392-1320
DOI: 10.5755/j02.ms.28372