Wear Studies on Polytetrafluroethylene (PTFE) Composites: Taguchi Approach
نویسندگان
چکیده
منابع مشابه
Experimental Study on Wear Behaviour of Sic Filled Hybrid Composites Using Taguchi Method
The popularity of composite materials usage is increasing due to its superior strength characters racing the traditional materials in strength to weight ratio. The developments of new materials are on the anvil and are growing day by day. In this work, two-body abrasive wear test with different loads and abrading distances were performed at room temperature by using a pin on a disk apparatus to...
متن کاملEvaluation of PTFE Composites with Mineral Tailing Considering Friction, Wear and Cost
The tribological test with Pin-On-Disc configuration measures friction and wear properties in dry or lubricated sliding surfaces of a variety of materials and coatings. Polymeric matrix composites loaded with mineral filler were used, 1%, 3%, 10%, 30%, and 50% mass percentage of filler, to reduce the material cost by using mineral tailings. Using a pin-on-disc tribometer to quantify coefficient...
متن کاملInvestigation in to Wear behavior of coir Fiber Reinforced Epoxy Composites with the Taguchi Method
In present investigation the wear behavior of treated and untreated coir dust filled epoxy resin matrix composites were studied. The effect of treated and un treated coir dust concentration (10%, 20% and 30%), varying loads (10, 20 and 30N) and varying velocities (300, 400 and 500) on the abrasive wear rate of composite has been analyzed. The abrasive wear property of the composite is examined ...
متن کاملFriction and wear of PTFE - a review
Polytetrafluoroethylene (PTFE) is an important engineering material. When rubbed or slid against a hard surface, PTFE exhibits a low coefficient of friction but a high rate of wear. These unique properties of the polymer have encouraged many mechanistic and physical examinations of the processes involved in the friction and wear of this polymer. A section of such work carried out over the past ...
متن کاملWear Behavior of Composites and Nanocomposites: A New Approach
The expulsion of material from either of two strong surfaces in relative movement is termed as wear. Wear can also be defined as surface damage, because of material relocation with no net change in weight or volume. It happens as a natural result and for the most part through surface interactions at severities. It is a system response and is not a material property. Interface wear is firmly com...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bonfring International Journal of Industrial Engineering and Management Science
سال: 2013
ISSN: 2250-1096,2277-5056
DOI: 10.9756/bijiems.4406