Wear Resistance Mechanism of ZTAP/HCCI Composites with a Honeycomb Structure
نویسندگان
چکیده
منابع مشابه
Wear resistance of Cu – 18 vol . % Nb ( P / M ) composites
Wear resistance of Cu–18 vol.% Nb (P/M) composites H. Nayeb-Hashemi a,∗, A. Vaziri b, K. Ziemer c a Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA 02115, United States b School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, United States c Department of Chemical Engineering, Northeastern University, Boston, MA 02115, Unite...
متن کاملThree-body wear of different composites resins
Introduction: Low resistance of composite resins to abrasion is a primary concern in the application of these materials for posterior restorations which are prone to high occlusal loads. This study compared the wear resistance of three types of composites. Methods: In this laboratory experiment, five specimens of each of the three types of composites (z250, Heliomolar, Opallis) were prepared...
متن کاملWear of Aged Dental Composites
Surface morphology and wear characteristics of five dental composites subjected to accelerated aging were investigated. Aging conditions caused degradation of the surface as evidenced by the formation of microcracks and the exposure and loss of filler particles. Wear parameters such as track width, transition load and mode of surface failure caused by single-pass sliding were influenced by agin...
متن کاملMechanism-Based FE Simulation of Tool Wear in Diamond Drilling of SiCp/Al Composites
The aim of this work is to analyze the micro mechanisms underlying the wear of macroscale tools during diamond machining of SiCp/Al6063 composites and to develop the mechanism-based diamond wear model in relation to the dominant wear behaviors. During drilling, high volume fraction SiCp/Al6063 composites containing Cu, the dominant wear mechanisms of diamond tool involve thermodynamically activ...
متن کاملDelamination Wear Mechanism in Gray Cast Irons
An investigation of the friction and sliding wear of gray cast iron against chromium plated cast irons was carried out on a newly constructed reciprocating friction and wear tester. The tests were the first to be done on the test rig under dry conditions and at the speed of 170 cm/min, and variable loads of 20-260 N for a duration of 15 min. to 3 hours. The gray cast iron surfaces worn by a pro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2018
ISSN: 2075-4701
DOI: 10.3390/met8080588