Wear resistance enhancement of titanium alloy (Ti–6Al–4V) by ball burnishing process
نویسندگان
چکیده
منابع مشابه
Characteristics of Resistance Spot Welded Ti6Al4V Titanium Alloy Sheets
Ti6Al4V titanium alloy is applied extensively in the aviation, aerospace, jet engine, and marine industries owing to its strength-to-weight ratio, excellent high-temperature properties and corrosion resistance. In order to extend the application range, investigations on welding characteristics of Ti6Al4V alloy using more welding methods are required. In the present study, Ti6Al4V alloy sheets w...
متن کاملThe E ect of Low Temperature Plasma Nitriding on Wear Resistance of Ti6Al4V Alloy
The e ect of low temperature plasma nitriding on wear resistance of Ti6Al4V alloy were investigated. There have been several studies to investigate the low temperature plasma nitriding on Ti6Al4V alloy. Plasma nitriding processes under gas mixture of N2/H2 = 3 were performed at temperature 535 ◦C for duration of 4, 8 and 12 h. Adhesive wear tests were carried out by using a tribometer in block-...
متن کاملCharacterization of loose powder sintered porous titanium and Ti6Al4V alloy
Porous titanium and Ti6Al4V alloy, biomedical candidate materials for use in orthopedic and dental implants, were manufactured by sintering the powders at various temperatures in loose condition. The characteristics of the corresponding powders and utilized sintering temperatures limited the final porosities in the range 30-37.5 vol. %. Similar to wrought alloys, compression stress-strain curve...
متن کاملArgon-shielded hot pressing of titanium alloy (Ti6Al4V) powders.
The paper presents the method of the argon - shielded hot pressing of titanium alloy (Ti6A14V) powder (used in medical industry). The powders produced in the GA (gas atomization) process and in the HDH (hydride - dehydride) process were used in the experiments. A pressing process was conducted at a temperature of 800-850 degrees C for different lengths of time. An unoxidized sintered material, ...
متن کاملEffect of CeO2 on Microstructure and Wear Resistance of TiC Bioinert Coatings on Ti6Al4V Alloy by Laser Cladding
To solve the lack of wear resistance of titanium alloys for use in biological applications, various prepared coatings on titanium alloys are often used as wear-resistant materials. In this paper, TiC bioinert coatings were fabricated on Ti6Al4V by laser cladding using mixed TiC and ZrO₂ powders as the basic pre-placed materials. A certain amount of CeO₂ powder was also added to the pre-placed p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research and Technology
سال: 2017
ISSN: 2238-7854
DOI: 10.1016/j.jmrt.2016.03.007