Wear optimization of titanium alloy cutter milled with microtextured ball-end milling cutter

Study of the effective cutter radius for end milling of free-form surfaces using a torus milling cutter

Cutter Path Generation For 2.5D Milling By Combining Multiple Different Cutter Path Patterns

Different cutter path patterns have been shown to be efficient for different types of pocket geometries. However, for certain types of complex pockets, no single type of pattern produces efficient cutter paths throughout the pocket. In this paper, different cutter path patterns are systematically analysed and several existing heuristics for selecting cutter path patterns are discussed. Based on...

Experimental Study on Milling CFRP with Staggered PCD Cutter

Carbon fiber reinforced plastics (CFRP) have good physical properties, such as high specific strength and high specific modulus. However, cutting delamination, tearing and burr, etc. often occur in the machining process of CFRP, which results in the uncontrollability of machining surface quality and serious tool wear. In this paper, milling of CFRP with a staggered cutter was carried out, the c...

High-speed ball nose end milling of burn-resistant titanium (BuRTi) alloy

• Users may freely distribute the URL that is used to identify this publication. • Users may download and/or print one copy of the publication from the University of Birmingham research portal for the purpose of private study or non-commercial research. • User may use extracts from the document in line with the concept of ‘fair dealing’ under the Copyright, Designs and Patents Act 1988 (?) • Us...

Global optimization of tool path for five-axis flank milling with a conical cutter

In this paper, optimum positioning of the conical cutter for five-axis flank milling of slender surfaces is addressed from the perspective of approximating the tool envelope surface to the data points on the design surface following the minimum zone criterion recommended by ANSI and ISO standards for tolerance evaluation. Based on the observation that a conical surface can be treated as a canal...