Wear of Hot-Pressed Aluminum Nitride

Dynamic Multiaxial Response of a Hot-Pressed Aluminum Nitride

Investigation of the Physical and Mechanical Properties of Hot-Pressed Boron Nitride/Oxide Ceramic Composites

Billets of hexagonal boron nitride powders (h-BN) were hot-pressed, varying the alignment of the platelike particles and the amount of oxide additives. Increasing either alignment of individual grains or the amount of additives was shown to increase flexural strength, to approximately 120 MPa at ambient temperatures. h-BN was shown to deflect cracks initially propagating normal to its basal pla...

Modeling the strain-rate dependence of fatigue life of hot- pressed silicon nitride

This paper presents the results of a micromechanical model used to explain the strain-rate dependence of the compression fatigue lives of amorphous and crystalline grain boundary phase; denoted by ABP and CBP silicon nitrides, respectively. When the strain-rate is changed from 400 to 0.01/s, the fatigue lives of both materials, evaluated at a peak stress of 3.2 GPa, increased by more than two o...

UV-Vis spectrophotometric analysis and light irradiance through hot-pressed and hot-pressed-veneered glass ceramics.

This study evaluated the irradiance of curing units through core and veneered hot-pressed ceramics as well as the transmittance of these materials. Discs of 0.7, 1.4 and 2 mm in thickness of Empress (EMP) and Empress Esthetic (EST), and 0.8 (n=5) and 1.1 mm (n=5) thickness of Empress 2 (E2) were obtained. For E2, two of the 0.8-mm-thick discs were covered with dentin (1.2- and 1.4-mm-thick) and...

Ultralow wear of gallium nitride