Wear behaviour of Cr3C2–Ni cermet reinforced hardfacings
نویسندگان
چکیده
منابع مشابه
Reciprocating Wear Behaviour of Two Dimensionally Reinforced Carbon-Phenolic and Carbon-Epoxy Composites
A comparative study has been carried out on performance of two-dimensionally reinforced carbon/ phenolic (C/P) and carbon/epoxy (C/E) composites, subjected to low amplitude reciprocating wear at different temperatures. The C/P composite has shown greater wear rate than the C/E composite, with the difference being modest at room temperature, and larger at 250 °C. The values of coefficient of fri...
متن کاملan investigation into the wear behaviour of aluminum (aa2124) matrix composite reinforced with intermetallic mosi2 particles
in the present work, the aa2124/25vol.%mosi2 composite was produced by powder metallurgy technique. the aluminum alloy 2124 powder was produced by gas atomization method and the mosi2 intermetallic particles were produced through combustion synthesis. the aa2124 matrix powder was mechanically blended with 25vol.%mosi2 using a ball milling mixer. the blended powder mixture was encapsulated and t...
متن کاملWear of ceramic particle-reinforced metal-matrix composites
Wear experiments have shown that when the applied normal stress exceeds a critical value, a transition occurs from the regime of mild wear to that of adhesive wear. As a result, the wear rate of particle-reinforced aluminium composites increases by a hundred-fold. Based on dislocation and delamination theories, a criterion is proposed for determining the critical transition load, and a quantita...
متن کاملWear of ceramic-on-carbon fibre reinforced PEEK hip replacements
Total hip replacement has been a successful surgical intervention for many years. However, concerns regarding UHMWPE wear particle induced osteolysis [1], have led to alternative bearing materials to be sought. Carbon-fibre reinforced poly-ether-ether-ketone (CFR-PEEK) is a fibre-reinforced polymer which has shown reduced wear in hip and knee configurations compared with conventional polyethyle...
متن کاملBehaviour of fibre reinforced concrete slabs
This paper presents a comparison of the properties of concrete slabs when two types of fibres are added. One specimen had no fibres and acted as a control specimen. The remaining four specimens had steel and polypropylene fibres added in the volumetric ratio of 0.5% and 1.0%. The dimensions of the slab specimens were 820×820×80 mm and were supported by four rollers at their edges. A displacemen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research and Technology
سال: 2020
ISSN: 2238-7854
DOI: 10.1016/j.jmrt.2020.05.042