Wear Behavior of Austenitic NiTi Shape Memory Alloy
نویسندگان
چکیده
منابع مشابه
Dissimilar laser welding of NiTi shape memory alloy to austenitic stainless steel archwires
In this research, dissimilar welding of NiTi shape memory alloy to AISI 304 austenitic stainless steel Archwires was investigated. For this purpose, common straight orthodontic archwire with rectangular cross-section and dimensions of (0.635 × 0.432 mm) were selected and the laser welding technique was used to connect the wires. The microstructure, chemical composition and phasesin the weld zon...
متن کاملDissimilar laser welding of NiTi shape memory alloy to austenitic stainless steel archwires
In this research, dissimilar welding of NiTi shape memory alloy to AISI 304 austenitic stainless steel Archwires was investigated. For this purpose, common straight orthodontic archwire with rectangular cross-section and dimensions of (0.635 × 0.432 mm) were selected and the laser welding technique was used to connect the wires. The microstructure, chemical composition and phasesin the weld zon...
متن کاملNanofretting behaviors of NiTi shape memory alloy
Nanofretting behaviors of NiTi shape memory alloy Linmao Qian a, Zhongrong Zhou a,∗, Qingping Sun b, Wenyi Yan c a Tribology Research Institute, National Traction Power Laboratory, Southwest Jiaotong University, Chengdu 610031, China b Department of Mechanical Engineering, The Hong Kong University of Science and Technology, Hong Kong, China c School of Engineering and Information Technology, De...
متن کاملWear behaviour of martensitic NiTi shape memory alloy under ball-on-disk sliding tests
Ball-on-disk sliding wear tests were conducted on martensitic NiTi shape memory alloy against an alumina counter ball. The wear features and coefficients of friction of the samples subjected to different loads and sliding cycles were investigated to reveal the degradation process of the NiTi surface. Three stages of degradation were identified, namely, a near-zero wear stage, a transition wear ...
متن کاملTheoretical investigation of wear-resistance mechanism of superelastic shape memory alloy NiTi
Recent experimental research indicates that superelastic shape memory alloy nickel–titanium (NiTi) is superior to stainless steel against wear and could be applied in tribological engineering. It is believed that the super wear resistance of shape memory alloys is mainly due to the recovery of the superelastic deformation. Our recent wear study indicates that wear rate is very sensitive to the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shape Memory and Superelasticity
سال: 2015
ISSN: 2199-384X,2199-3858
DOI: 10.1007/s40830-015-0008-1