WC–Co Hard Alloys Alloyed with Tantalum Carbide. Review
نویسندگان
چکیده
منابع مشابه
Tantalum Carbide and Nitride Diffusion Barriers for Cu Metallisation
The reactions in the Si/TaC/Cu and Si/Ta2N/Cu metallisation systems were investigated by x-ray diffraction, Rutherford backscattering, scanning electron microscope and the transmission electron microscopy. The results were then combined with the assessed ternary SiTa-C, Ta-C-Cu, Si-Ta-N and Ta-N-Cu phase diagrams. It was found that both barriers ultimately failed due to diffusion of Cu through ...
متن کاملThermal Analysis of Tantalum Carbide-Hafnium Carbide Solid Solutions from Room Temperature to 1400 C
The thermogravimetric analysis on TaC, HfC, and their solid solutions has been carried out in air up to 1400 ◦C. Three solid solution compositions have been chosen: 80TaC-20 vol % HfC (T80H20), 50TaC-50 vol % HfC (T50H50), and 20TaC-80 vol % HfC (T20H80), in addition to pure TaC and HfC. Solid solutions exhibit better oxidation resistance than the pure carbides. The onset of oxidation is delaye...
متن کاملSynthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method
In this study, mechanochemcical process(MCP) is applied to synthesize ultrafine TaC powders. In this research, nano powder composite TaC-TaB2 was produced using mixtures of tantalum carbide and boron carbide as raw materials via mechanochemical process. The phase formation characterization during process was utilized by X-ray diffractometry (XRD). The morphology of synthesized powder was studie...
متن کاملIn Vitro Biocompatibility of Si Alloyed Multi-Principal Element Carbide Coatings
In the current study, we have examined the possibility to improve the biocompatibility of the (TiZrNbTaHf)C through replacement of either Ti or Ta by Si. The coatings were deposited on Si and 316L stainless steel substrates by magnetron sputtering in an Ar+CH4 mixed atmosphere and were examined for elemental composition, chemical bonds, surface topography, surface electrical charge and biocompa...
متن کاملNano-sized Superlattice Clusters Created by Oxygen Ordering in Mechanically Alloyed Fe Alloys
Creating and maintaining precipitates coherent with the host matrix, under service conditions is one of the most effective approaches for successful development of alloys for high temperature applications; prominent examples include Ni- and Co-based superalloys and Al alloys. While ferritic alloys are among the most important structural engineering alloys in our society, no reliable coherent pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya (Proceedings of Higher Schools. Powder Metallurgy аnd Functional Coatings)
سال: 2015
ISSN: 1997-308X
DOI: 10.17073/1997-308x-2015-2-44-48