Waveguide surface plasmon resonance sensors
نویسندگان
چکیده
منابع مشابه
Surface Plasmon Resonance-Based Fiber and Planar Waveguide Sensors
Bulk surface Plasmons resonance devices have been researched for several decades. These devices have found a special niche as high-sensitivity refractive index sensor in biomedical applications. Recent advances in guided wave devices are rapidly changing the capabilities of such sensors, not only increasing convenience of use but also opening opportunities due to their versatility. This paper r...
متن کاملSurface Plasmon Resonance Imaging Sensors: A Review
Surface plasmon resonance (SPR) imaging sensors realize label free, real-time, highly sensitive, quantitative, high throughput biological interaction monitoring and the binding profiles from multi-analytes further provide the binding kinetic parameters between different bio-molecules. In the past two decades, SPR imaging sensors found rapid increasing applications in fundamental biological stud...
متن کاملSurface Plasmon Resonance Sensors for Disease Diagnosis
Most of the optical sensors based on surface plasmon resonance (SPR) are imitated from two main configurations. Firstly, in the KretschmannRaether configuration, a thin metal layer is sandwiched between the prism and the air. Otherwise, the Otto configuration, there is a gap between the metal and the prism. However, the Kretschmann-Raether geometry is more conventional scheme to generate the su...
متن کاملFabry-Pérot-based surface plasmon resonance sensors.
A new sensing approach based on the use of an optical Fabry-Pérot (FP) cavity in conjunction with surface plasmon resonance (SPR) is proposed and theoretically investigated. The impact of the SPR on the intensity and phase response of the proposed sensor structure is evaluated using a modified FP model that takes into account the SPR effect. Compared to the conventional optical-phase-detection-...
متن کاملSpoof surface plasmon waveguide forces.
Spoof surface plasmons (SP) are SP-like waves that propagate along metal surfaces with deeply sub-wavelength corrugations and whose dispersive properties are determined primarily by the corrugation dimensions. Two parallel corrugated surfaces separated by a sub-wavelength dielectric gap create a "spoof" analog of the plasmonic metal-insulator-metal waveguides, dubbed a "spoof-insulator-spoof" (...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors and Actuators B: Chemical
سال: 1995
ISSN: 0925-4005
DOI: 10.1016/0925-4005(95)01692-9