Water/Heavy Fuel Oil Emulsion Production, Characterization and Combustion
نویسندگان
چکیده
منابع مشابه
Combustion of Water-in-Oil Emulsion Layers Supported on Water
In situ combustion of a water-in-oil emulsion layer supported on water is a complex process. In this paper, the combustion process of water-in-oil emulsion layers floating on top of a water body, as in the case of in situ burning of oil spilled at sea that has turned into emulsion, is modeled by using comprehensive mathematical treatment, and the results are compared with data obtained in our l...
متن کاملFine Particle Emissions from Residual Fuel Oil Combustion: Characterization and Mechanisms of Formation
The characteristics of particulate matter (PM) emitted from residual fuel oil combustion in two types of combustion equipment were compared. A small commercial 732 kW rated fire-tube boiler yielded a weakly bimodal particulate size distribution (PSD) with over 99% of the mass contained in a broad coarse mode and only a small fraction of the mass in an accumulation mode consistent with ash vapor...
متن کاملبوزدایی از fuel oil deodorization of fuel oil
مطالعات و بررسی های انجام گرفته نشان می دهد ترکیبات بودار موجود در fuel oil عمدتا ترکیبات سولفوردار سخت مثل تیوفن، دی متیل بنزوتیوفن و ... بوده و روشهای بوزدایی همچون استخراج با حلالهای اسیدی و بازی ، رقیق کاری با گازولین ، ماسکینگ با بوتیل استات نتایج چندان مطلوبی در بوزدایی از آن نشان نمی دهند.همچنین روش جذب سطحی برای بوزدایی fuel oil تنها با استفاده از جاذب هایی همچون بنتونیت و توفیت...
15 صفحه اولBiomass Characterization and its Use as Solid Fuel for Combustion
(Received: January 8, 2012; Accepted: Februray 8, 2012) Abstract: The power industry is confronting challenges with seemingly conflicting goals. They provide the economy of scale needed to minimize the cost of production. Consumers, including industry, rely on affordable, dependable electrical energy. It’s an important part of our economy and our daily lifestyle. However, reducing emission leve...
متن کاملPyrolytic Waste Plastic Oil and Its Diesel Blend: Fuel Characterization
The authors introduced waste plastic pyrolysis oil (WPPO) as an alternative fuel characterized in detail and compared with conventional diesel. High density polyethylene, HDPE, was pyrolyzed in a self-designed stainless steel laboratory reactor to produce useful fuel products. HDPE waste was completely pyrolyzed at 330-490°C for 2-3 hours to obtain solid residue, liquid fuel oil, and flammable ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Renewable Energy Development
سال: 2021
ISSN: 2252-4940
DOI: 10.14710/ijred.2021.34873