Water Vapor Adsorption/Desorption on Two Fully Characterized Commercial Activated Carbons
نویسندگان
چکیده
منابع مشابه
Water Vapor Adsorption on Chemically Treated Activated Carbon Cloths
Water vapor adsorption on activated carbon cloth (ACCBO) which has been oxidized to a level of 32% oxygen exhibits a unique isotherm with uniform hysteresis of small magnitude upon desorption. In contrast the adsorption on untreated ACCBO and chemically modified ACCBO (7.8% Cl), ACCBO (16% Cl), and ACCBO (4% N), exhibits sigmoidal isotherms with hysteresis loops of varying magnitudes. The latte...
متن کاملUnderstanding Phenol Adsorption Mechanisms on Activated Carbons
The interactions between phenol molecules and activated carbons were investigated in order to understand the adsorption mechanism of this aromatic compound. A series of activated carbons with varied chemical composition but similar porous features were synthesized and submitted to phenol exposure from aqueous phase, followed by thermogravimetric analysis and identification of the desorbed speci...
متن کاملIsotherm Equation for Water Vapor Adsorption onto Activated Carbon
A simple isotherm model has been developed for the type-5 equilibrium adsorption systems by considering the effects of both primary and secondary adsorptive sites. The model was applied to interpret experimental data describing water vapor adsorption capacities of four activated carbon adsorbents for relative vapor pressures from 0.0 to 0.95 and temperatures between 288 and 308 K. Good agreemen...
متن کاملWater Vapor Adsorption on Biomass Based Carbons under Post-Combustion CO₂ Capture Conditions: Effect of Post-Treatment.
The effect of post-treatment upon the H₂O adsorption performance of biomass-based carbons was studied under post-combustion CO₂ capture conditions. Oxygen surface functionalities were partially replaced through heat treatment, acid washing, and wet impregnation with amines. The surface chemistry of the final carbon is strongly affected by the type of post-treatment: acid treatment introduces a ...
متن کاملOn the determination of surface areas in activated carbons
The paper examines the validity of two approaches frequently used to determine surface areas in activated carbons, namely the BET method and the use of immersion calorimetry. The study is based on 21 well characterized carbons, whose external and microporous surface areas, Se and Smi, have been determined by a variety of independent techniques. It appears clearly that SBET and the real surface ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Chemical & Engineering Data
سال: 2015
ISSN: 0021-9568,1520-5134
DOI: 10.1021/acs.jced.5b00775