Water Flow Experiment and Analysis on the Cross-Flow Type Mercury Target Model with the Blade Flow Distributors
نویسندگان
چکیده
منابع مشابه
the effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
Modeling and Analysis of Vehicles Flow on the Road
Abstract: This study is carried out to describe the behaviour of vehicles flow on the road, in the presence of blocking effects. A non-linear three dimensional system of ordinary differential equations is used to describe vehicles flow on the road. The study classify total vehicles population on the road into three compartments as Free – Slow – Released vehicles. The formulated model is well-po...
متن کاملEvaluating The Performance Of Refrigerant Flow Distributors
CFD was applied to evaluate the performance of both existing and improved designs for refrigerant distributors. In general, it is better to utilize a spherical base as compared with other shapes and to locate the orifice close to distributor base. These changes tend to improve the robustness of the distributor in terms of providing even flow and phase distribution in different outlet branches w...
متن کاملInvestigating the Effect of Heterogeneity on Buckley-Leverett Flow Model
The performance of water flooding can be investigated by using either detail numerical modeling or simulation, or simply through the analytical Buckley-Leverett (BL) model. The Buckley-Leverett analytical technique can be applied to one-dimensional homogeneous systems. In this paper, the impact of heterogeneity on water flooding performance and fractional flow curve is investigated. First, a ba...
متن کاملLaminar Flow Analysis in the Channel Bends
In this paper the laminar flow in the rectangular channel bends is simulated using numerical techniques. The turning angle of the channel bend and the area ratio of the channel cross-section are two important parameters to be examined. For flow simulation, the body fitted 3-D continuity and momentum equations are used and a body fitted general purpose code is developed. The existing results of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Atomic Energy Society of Japan / Atomic Energy Society of Japan
سال: 2000
ISSN: 0004-7120
DOI: 10.3327/jaesj.42.821