Water-Cooled Target Box Design at LAMPF

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Pulsed Radiofrequency, Water-Cooled Radiofrequency, and Cryoneurolysis

Sluijter et al.8 assumed that, because the tissue temperature was kept below the thermal destructive range, thermal tissue injury was avoided. By using mathematical calculations, they further showed that the high-density electrical currents generated at the electrode tip stressed the cellular membranes and biomolecules and caused altered cell function, leading to cell injury. Later investigator...

متن کامل

Conceptual Design Study of an Accelerator-based Actinide Transmutation Plant with Sodium-cooled Solid Target/Core

Research and development ,works on accelerator-based nuclear waste transmutation are carried out at JAERI under the national program OMEGA. The preliminary design of the ~proposed minor actinide transmutation plant with a solid targetkore is described. The plant consists of a high intensity proton accelerator, spallatkm target of solid tungsten, and subcritical core loaded with actinide alloy f...

متن کامل

Tests with a cryogenically cooled target beam source at the ESR

For the future storage-ring experiments at the FAIR facility besides a large target area density (10-10 cm) a small interaction length (<5 mm) is also required, especially for the low-Z gases hydrogen and helium. State-ofthe-art internal targets are realized by producing a supersonic gas jet, i.e., by expanding a gas through a nozzle into vacuum, providing a target with a thickness < 10 cm spre...

متن کامل

Core Design and Deployment Strategy of Heavy Water Cooled Sustainable Thorium Reactor

Our previous studies on water cooled thorium breeder reactor based on matured pressurized water reactor (PWR) plant technology concluded that reduced moderated core by arranging fuel pins in a triangular tight lattice array and using heavy water as coolant is appropriate for achieving better breeding performance and higher burn-up simultaneously [1–6]. One optimum core that produces 3.5 GW ther...

متن کامل

Simulation Studies of the Lampf Proton Linac

The LAMPF accelerator consists of two 0.75-MeV injectors, one for H + and the other for H − , a separate low-energy beam transport (LEBT) line for each beam species, a 0.75 to 100-MeV drift-tube linac (DTL) operating at 201.25 MHz, a 100-MeV transition region (TR), and a 100 to 800-MeV side-coupled linac (SCL) operating at 805 MHz. Each LEBT line consists of a series of quadrupoles to transport...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: IEEE Transactions on Nuclear Science

سال: 1983

ISSN: 0018-9499

DOI: 10.1109/tns.1983.4332785