Water Chemistry Management toward Corrosion for Secondary Cooling Piping of Multi Purpose Reactor GA Siwabessy Indonesia

A Review of Stress Corrosion Cracking/Fatigue Modeling for Light Water Reactor Cooling System Components

Supercritical Water Radiolysis Chemistry Supercritical Water Corrosion

The direct measurement of the chemistry in reactor cores is extremely difficult. The extreme conditions of high temperature, pressure, and radiation fields, are not compatible with normal chemical instrumentation. There are also problems of access to fuel channels in the reactor core. For these reasons, all reaction vendors and many operators have extensively used theoretical calculations and c...

Derivation of conflict resolution rule-curves in multi-purpose multi-reservoir system for inter-basin water transfer during drought

Chemistry of corrosion

This Module consists of three Web pages of required reading. The pagination is visible at the bottom of each page with direct links to adjacent pages. Introduction The driving force that causes metals to corrode is a natural consequence of their temporary existence in metallic form. To reach this metallic state from their occurrence in nature in the form of various chemical compounds (ores), it...

INVESTIGATION INTO SYNERGISTIC EFFECT OF MOLYBDATE AND PHOSPHATE AS AN INHIBITOR FOR MILD STEEL CORROSION PREVENTION IN SIMULATED COOLING WATER

The synergistic behavior of molybdate and phosphate ions in mitigating the corrosion of mild steel in simulated cooling water was evaluated performing potentiodynamic polarization and impedance spectroscopy tests. Phosphate and molybdate showed a synergistic effect on corrosion inhibition of steel in simulated cooling water. The observed reduction in anodic and cathodic current densities could ...