Water-Assisted Production of Polypropylene/Boehmite Composites
نویسندگان
چکیده
منابع مشابه
Water-Assisted Production of Thermoplastic Nanocomposites: A Review
Water-assisted, or more generally liquid-mediated, melt compounding of nanocomposites is basically a combination of solution-assisted and traditional melt mixing methods. It is an emerging technique to overcome several disadvantages of the above two. Water or aqueous liquids with additives, do not work merely as temporary carrier materials of suitable nanofillers. During batchwise and continuou...
متن کاملProduction method of rubber and sulfur FG composites
In the presented work, sulfur concrete and rubber were used for producing functionally graded materials (FGM). The physical and mechanical properties of sulfur concrete and rubber were changed continuously across the thickness. On one side, there was just rubber and, on the other, there was pure sulfur; the properties of each substance were moved to reach another. This kind of material was cons...
متن کاملThe Utilization of Waste Water from a Concrete Plant in the Production of Cement Composites
This article presents the results of a study dealing with the utilization of sludge water from a concrete plant as a partial replacement for mixing water in the production of cement composites. The replacement of mixing water with sludge water from a concrete plant was carried out in the amounts of 20% and 50%. The following tests were carried out in order to determine the effect of the replace...
متن کاملWater Absorption Behavior of Hemp Hurds Composites
In this paper, water sorption behavior of 28 days hardened composites based on hemp hurds and inorganic binder was studied. Two kinds of absorption tests on dried cube specimens in deionized water bath at laboratory temperature were performed. Short-term (after one hour water immersion) and long-term (up to 180 days) water absorption tests were carried out to study their durability. Short-term ...
متن کاملWater Permeability of Cracked Cementitious Composites
Cracking is one of the most severe problems facing the concrete industry worldwide. Of critical importance is the drastic decline of durability associated with these cracks, and the resulting cost of repair or replacement of concrete structures. This research examines the effect of crack width and crack frequency upon the durability of reinforced mortar, quantified by water permeability. Crack ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Periodica Polytechnica Mechanical Engineering
سال: 2020
ISSN: 1587-379X,0324-6051
DOI: 10.3311/ppme.13981