Waste Glass Corrosion Modeling: Comparison with Experimental Results

Conversion of nuclear waste into nuclear waste glass: Experimental investigation and mathematical modeling

The melter feed, slurry, or calcine charged on the top of a pool of molten glass forms a floating layer of reacting material called the cold cap. Between the cold-cap top, which is covered with boiling slurry, and its bottom, where bubbles separate it from molten glass, the temperature changes by up to 1000 K. The processes that occur over this temperature interval within the cold cap include l...

modeling of a wet porous media under low temperature conditions and its comparison with experimental results

0

Corrosion in Waste Fired Systems

QSAR modeling of antimicrobial activity with some novel 1,2,4 triazole derivatives, comparison with experimental study

Our study performed upon an extended series of 28 compounds of 1,2,4-triazole derivatives that demonstrate substantial in vitro antimicrobial activities by serial plate dilution method, using quantitative structure-activity relationship (QSAR) methods that imply analysis of correlations and multiple linear regression (MLR); a significant collection of molecular descriptors was used e.g., Edge a...

Behavior Simulation Polyamide 6 (PA6) During Friction Stir Welding and Comparison with Experimental Results

In this study, the effects of linear speed and rotational speed of the friction stir welding tool was investigated on the heat generation and distribution of heat,the material flow and weld defect formation of the Polyamide 6 (PA6) workpiece. The commercial CFD Fluent 6.4 software package was used to the simulation of the process with computational fluid dynamic technique. The output results of...