Warm deformation behaviour of P92 steel
نویسندگان
چکیده
منابع مشابه
PREDICTION OF HOT DEFORMATION BEHAVIOUR OF A PH STAINLESS STEEL AT HIGH STRAIN RATES
In this study the hot deformation behaviour of a precipitation hardened (PH) stainless steel at high strain rates has been predicted through hot compression testing. Stress-strain curves were obtained for a range of strain rates from 10-3 to 10+1 S-1 and temperatures from 850 to 1150°C. Results obtained by microstructure and stress-strain curves show that at low temperatures and high strain rat...
متن کاملExponential-type Constitutive Equation in Order to Use in Modeling the Warm Deformation of a Eutectoid Steel
The main contribution of the present work is to investigate the capability of exponential-type constitutive equationto model the warm deformation flow curves of a eutectoid steel in the temperature range of 620-770 °C andat the strain rates in the range of 0.01-10 s-1 conducted on a Gleeble-1500 thermomechanical simulator. Warmdeformation in this temperature range f...
متن کاملEvaluation of Irradiation Hardening of P92 Steel under Ar Ion Irradiation
P92 steel was irradiated with Ar ion up to 10 dpa at 200, 400, and 700 ◦C. The effect of Ar ion irradiation on hardness was investigated with nanoindentation tests and microstructure analyses. It was observed that irradiation-induced hardening occurred in the steel after Ar ion irradiation at all three temperatures to 10 dpa. The steel exhibited significant hardening at 200 and 700 ◦C, and slig...
متن کاملEvaluation of Creep Properties of Steel P92 and Its Welded Joint
P. Mohyla, R. Cep, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, Czech Republic; Z. Kubon, Materials and Metallurgical Re search, Lt d., Cz ech Re p.; I . S amardzic, Jo sip Ju raj Strossmayer Un iversity of Osijek Mechanical Engineering Faculty i n Slavonski Brod Croatia This work is focused on testing and evaluation of creep properties of P92 base material (BM) and w...
متن کاملThe Influence of Gas Heating on Material Properties of P92 Steel During Boiler Tube Alignment
Preliminary note The pipes and the pipe walls are of the utmost importance to all power plant facilities. Under exploitation, they are subjected to effects of aggressive media, high temperature corrosion and possible mechanical damage. Consequently, special attention is paid to the control of material properties during the power plant construction in order to minimize the risk of flaws or failu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Express
سال: 2020
ISSN: 2053-1591
DOI: 10.1088/2053-1591/ab5e9c