Walnut Shells as a Potential Fuel for Iron Ore Sintering

نویسندگان

چکیده

Iron ore sintering is a predominant process for fine iron and its concentrate to be applied in the blast furnace process. However, produces negative impact on environment. One of effective ways reduce greenhouse gas emissions from use CO 2 -neutral biomaterials fuel needs this technology. Walnut shells (WNS) are promising raw material such substitute. Herein, effect pyrolyzed WNS with constant fineness 3-0 mm sinter properties were studied. The proportion composition was set 25 wt.%. It has been established that up 873 K optimal. Additionally, difference reactivity coke breeze provoked studies influence size 1-0, 3-0, 5-0, 7-0 mm. found most optimal both quality particle mm, subjected preliminary pyrolysis K.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Atmospheric emission of polychlorinated naphthalenes from iron ore sintering processes.

Iron ore sintering processes constitute significant sources of dioxins, and studies have confirmed a close correlation between polychlorinated naphthalenes (PCNs) and dioxin formation. Thus, iron ore sintering processes are thought to be a potential source of PCNs, although intensive investigations on PCN emissions from sintering processes have not been carried out. Therefore, the aim of the pr...

متن کامل

Mathematical Model For Energy Saving In Induration Of Iron Ore Pellets Containing Solid Fuel

Mathematical model for a pilot scale iron ore pellet induration furnace has been developed which considers the process of induration including the reactions of limestone, magnetite and coke. The differential equations of energy, mass and momentum are solved simultaneously. The profiles of temperature, pressure and concentration are obtained. Performing separate experiments on sub processes; dry...

متن کامل

Factors Controlling High-temperature Zone Resistance to Airflow during Iron Ore Sintering

A fundamental study was carried out on the high-temperature zone flow resistance during iron ore sintering. In present work, firstly, quartz sand was used to replace iron ores to investigate the impact of temperature if bed structure has no change; then a three-layer bed structure was used to explore the primary factors controlling high-temperature zone structure for airflow. The zone where tem...

متن کامل

Modeling and Simulation of Processes from an Iron Ore Sintering Plant

This work presents the mathematic models of the basic processes from an iron ore processing plant. Based on the mathematic models, using the Matlab/Simulink platform, it was achieved the simulation of the dosing process and simulation of the sintering process. The achieved mathematic model allows the determination of the material flows in the charge at their chemical composition variation, or a...

متن کامل

Influence of Preformation Process on Combustibility of Biochar and its Application in Iron Ore Sintering

A study was carried out into the use of preformation process to prepare biochar for replacing coke breeze in iron ore sintering. Two types of preformation process, thermo-compression process (TCP) and normal temperature process (NTP), were adopted. Results show that preformation contributed to improving the density of both raw biomass and biochar. Recommended preformation parameters for TCP wer...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials Science Forum

سال: 2021

ISSN: ['1422-6375', '0250-9776', '0255-5476', '1662-9752', '1662-9760']

DOI: https://doi.org/10.4028/www.scientific.net/msf.1045.127