Wall Thinning Assessment for Ferromagnetic Plate with Pulsed Eddy Current Testing Using Analytical Solution Decoupling Method

Development of Pulsed Eddy Current Testing System for Wall Thinning through Insulation with Ferromagnetic Cladding

Corrosion is one of the important factors in equipment failures. Wall thinning can be used to evaluate corrosion conditions. However, most of equipments are coated with insulations in order to elevate the energy efficiency. Pulsed eddy current (PEC) testing technique can be used to measure wall thinning through insulation. But when the insulation outside is wrapped with galvanized steel, PEC si...

Corrosion Steel Inspection under Steel Plate Using Pulsed Eddy Current Testing

Pulsed eddy current inspection techniques were derived from the conventional eddy current testing technology, based on the fundamental principle of an eddy current coil, but using periodic ultrasound pulses. The authors first introduce the principle of pulsed eddy current inspection and some experimental measurement results using pulsed eddy current equipment. This technology can be applied to ...

A Study of Applying Pulsed Remote Field Eddy Current in Ferromagnetic Pipes Testing

Pulsed Remote Field Eddy Current Testing (PRFECT) attracts the attention in the testing of ferromagnetic pipes because of its continuous spectrum. This paper simulated the practical PRFECT of pipes by using ANSYS software and employed Least Squares Support Vector Regression (LSSVR) to extract the zero-crossing time to analyze the pipe thickness. As a result, a secondary peak is found in zero-cr...

Differential Hall-sensor Pulsed Eddy Current Probe for the Detection of Wall thinning in an Insulated Stainless Steel Pipe

Pulsed Eddy Current Sensing for Critical Pipe Condition Assessment

Pulsed Eddy Current (PEC) sensing is used for Non-Destructive Evaluation (NDE) of the structural integrity of metallic structures in the aircraft, railway, oil and gas sectors. Urban water utilities also have extensive large ferromagnetic structures in the form of critical pressure pipe systems made of grey cast iron, ductile cast iron and mild steel. The associated material properties render N...