Wafer-scale pulsed laser deposition of ITO for solar cells: reduced damage <i>vs.</i> interfacial resistance
نویسندگان
چکیده
Halide perovskite and silicon heterojunction solar cells present sensitive contact layers prone to damage during ITO deposition. We study the effect of pulsed laser deposition pressure on mitigation improved cell performance.
منابع مشابه
Pulsed laser deposition of ITO/AZO transparent contact layers for GaN LED applications.
In this study, indium-tin oxide (ITO)/Al-doped zinc oxide (AZO) composite films were fabricated by pulsed laser deposition and used as transparent contact layers (TCLs) in GaN-based blue light emitting diodes (LEDs). The ITO/AZO TCLs were composed of the thin ITO (50 nm) films and AZO films with various thicknesses from 200 to 1000 nm. Conventional LED with ITO (200 nm) TCL prepared by E-beam e...
متن کاملPulsed Laser Deposition of SiO
Thin films of bioactive glass-ceramic have been deposited on titanium substrates by the Pulsed Laser Deposition (PLD) technique under different experimental conditions. The effect of parameters such as deposition pressure and temperature of heat treatments was studied. The microstructure and the crystalline phases of the coatings were characterized using SEM, EDX and XRD analysis; the phases pr...
متن کاملPulsed Laser Deposition of Oxides
As a materials processing technique, laser ablation was utilized for the first time in the 1960's, after the first commercial ruby laser was invented. Nevertheless, as a thin film growth method it did not attract much research interest until the late 1980 ́s, when it has been used for growing high temperature superconductor films. Since then, the development of the pulsed laser deposition (PLD) ...
متن کاملPulsed Laser Deposition and Epitaxy
Laser is a powerful tool in many applications. It is especially useful in material processing. Thanks to it's narrow frequency bandwidth, coherence and high power density this instrument is used in many scientific research works and experiments. Often the light beam is intense enough to vaporize the hardest and most heat resistant materials. Besides, due to its high precision, reliability and s...
متن کاملRapid Wafer-Scale Growth of Polycrystalline 2H-MoS2 by Pulsed Metalorganic Chemical Vapor Deposition.
High volume manufacturing of devices based on transition metal dichalcogenide (TMD) ultra-thin films will require deposition techniques that are capable of reproducible wafer-scale growth with monolayer control. To date, TMD growth efforts have largely relied upon sublimation and transport of solid precursors with minimal control over vapor phase flux and gas-phase chemistry, which are critical...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials advances
سال: 2022
ISSN: ['2633-5409']
DOI: https://doi.org/10.1039/d1ma01225h